TP03 is a digital manometer equipped with memory, to display the peak pressure as well as the effective pressure.
Furthermore, TP03 calculates the leakage time, that is the necessary time to pass from an higer level of pressure to a lower one (both limits are programmable).
For these features TP03 is the most appropriate electronic instrument to be used in conjunction with an injector tester, to automatically relief the Nozzle Onpening Pressure (NOP) of the conventional diesel fuel injectors, as well as NOP1 NOP2 of the 2-stage (double spring) injectors.
By a T connection (M14x1,5), the pressure sensor is insterted into the hydraulic circuit (on the pop tester, between the outlet from the pump and the injector). TP03 is an add-on to any hand operated injector tester and doesn't enahce the hydraulic performances of the injector tester.
When connected directly on vehicle, the TP03 can also be used to test the pressure and detect leakages in Common-rail systems.
24 months warranty.

Specifications:
- external diameter: 6 mm
- internal diameter: 2 mm
- thickness: 2 mm
- length: 600 mm
- nuts: M14x1,5 mm - M14x1,5 mm
Similar to Bosch reference 1 680 750 008, Hartridge AHP119, Denso 95091-10280

High pressure test pipes for test bench (unbent) , covered by rubber
Specifications:
- external diameter: 6 mm
- internal diameter: 2 mm
- thickness: 2 mm
- length: 840 mm
- nuts: M12x1,5 mm - M14x1,5 mm
Similar to Bosch reference 1 680 750 017, Hartridge AHP118

High-pressure testing accumulator assembly for the ERT45R Common Rail pump test system. Designed for operation up to 2500 bar, it houses the pressure sensor and pressure control valve, separates the pressure-control return flow, monitors fuel temperature and incorporates overpressure protection.

Sensor for the test bench shaft for application Caterpillar C6.6

Cable for Denso common rail injectors, 4 poles on Toyota

This service is a comprehensive opportunity aimed at enhancing the technical skills of diesel injection Specialists.
This one-day course, spanning 8 working hours, will be conducted in English at the DETEQ headquarters in Italy, accommodating a maximum of 2 participants.
Throughout the course, participants will engage with experienced DETEQ technicians who will cover essential topics including the performance features of the products, installation challenges, proper usage methods, and maintenance practices. The hands-on practicality of this training is crucial; participants will receive step-by-step guidance from our technical personnel during practical exercises. At the end of the session, each attendee will be awarded a certificate, confirming their successful participation and knowledge gained during the training. This initiative not only improves operational competency but also empowers technicians to maximize the efficiency and reliability of their diesel diagnostic systems.

Training course for the use of DIT31&TC38 Injector tester for the testing of traditional, double spring and common rail injectors ( equipped with electromagnetic and piezoelectric actuator ).

Service features:

- The training course will take place in Italy at DETEQ headquarter
- Duration of 1 day ( 8 working hours )
- Maximum for 2 participants
- Is held in English Language
- The standard training is destined to participants already operators of diesel systems.
- Is excluded the technical instruction on the technology of the components which are object of the machine operativity. This kind of service can be provided only upon agreement with DETEQ.
-At the end of the training will be issued a frequency profit Certificate

The course includes the training provided by DETEQ Technicians, for:
- Performance features of the products
- Details and installation problems
- Methods of use
- Maintenance
- Practice with the help of DETEQ technicians. The participants will be first instructed and then followed step by step by our technical personnel for practical exercises.

Training service for the use of the ERT45R Simulator with the kits for the test of BOSCH VP44/VR30 pumps.

Service features:
- The training course will take place in Italy at DETEQ headquarter
- Duration of 1 day ( 8 working hours )
- Maximum for 2 participants
- Is held in English Language
- The standard training is destined to participants already operators of diesel systems.
- Is excluded the technical instruction on the technology of the components which are object of the machine operativity. This kind of service can be provided only upon agreement with DETEQ.
-At the end of the training will be issued a frequency profit Certificate

The course includes the training provided by DETEQ Technicians, for:
- Performance features of the products
- Details and installation problems
- Methods of use
- Maintenance
- Practice with the help of DETEQ technicians. The participants will be first instructed and then followed step by step by our technical personnel for practical exercises.

Training for the use of the ERT45R simulator with the programming kit for testing the Bosch CP1/CP3/CP4 common rail pumps.

Service features:
- The training course will take place in Italy at the DETEQ site
- Duration of 1 day
- Maximum for 2 participants
- It is taught in English
- Standard training is intended for participants who are already operators of diesel systems.
- Technical instructions on the technology of the components that are the object of the operation of the machine are excluded. This type of service can only be provided with DETEQ.
- At the end of the training a certificate of attendance will be issued

The course includes training provided by DETEQ technicians, for:
- Performance characteristics of the products
- Details and installation problems
- Methods of use
- Maintenance
- Practice with the help of DETEQ technicians. Participants will first be instructed and followed by our technical staff for practical exercises.

Training service for the use of the ERT45R Simulator with the kits for the test of Delphi DP2... and DP3.. pumps. This is not a full training concerning the complete overhault of this pump.
The matters of this training are the following:
- Performance features of the products
- Details and installation problems
- Methods of use
- Maintenance
- Practice with the help of DETEQ technicians. The participants will be first instructed and then followed step by step by our technical personnel for practical exercises.
- Location: in Italy at DETEQ headquarter
- Duration: 1 day (8 working hours)
- Maximum number of attenders: 2 diesel specialists having skills on this type of pump
- Is held in English Language
- Individual Certificate of Training is delivered.

Training service for the use of the ERT45R Simulator with the kits for the test of DENSO ECD-V3/V4 & DENSO ECD-V5 pumps..

Service features:
- The training course will take place in Italy at DETEQ headquarter
- Duration of 1 day ( 8 working hours )
- Maximum for 2 participants
- Is held in English Language
- The standard training is destined to participants already operators of diesel systems.
- Is excluded the technical instruction on the technology of the components which are object of the machine operativity. This kind of service can be provided only upon agreement with DETEQ.
-At the end of the training will be issued a frequency profit Certificate

The course includes the training provided by DETEQ Technicians, for:
- Performance features of the products
- Details and installation problems
- Methods of use
- Maintenance
- Practice with the help of DETEQ technicians. The participants will be first instructed and then followed step by step by our technical personnel for practical exercises.

Training service for the use of the ERT45R Simulator with the kits for the test of ZEXEL Covec F1/F2 pumps with electric actuator. This is not a full training concerning the complete overhault of this pump.
The matters of this training are the following:
- Performance features of the products
- Details and installation problems
- Methods of use
- Maintenance
- Practice with the help of DETEQ technicians. The participants will be first instructed and then followed step by step by our technical personnel for practical exercises.
- Location: in Italy at DETEQ headquarter
- Duration: 1 day (8 working hours)
- Maximum number of attenders: 2 diesel specialists having skills on this type of pump
- Is held in English Language
- Individual Certificate of Training is delivered.

Training service for the use of the ERT45R Simulator with the kits for the test of ZEXEL VRZ pumps. This is not a full training concerning the complete overhault of this pump.
The matters of this training are the following:
- Performance features of the products
- Details and installation problems
- Methods of use
- Maintenance
- Practice with the help of DETEQ technicians. The participants will be first instructed and then followed step by step by our technical personnel for practical exercises.
- Location: in Italy at DETEQ headquarter
- Duration: 1 day (8 working hours)
- Maximum number of attenders: 2 diesel specialists having skills on this type of pump
- Is held in English Language
- Individual Certificate of Training is delivered

Training service for the use of the ERT45R Simulator with the kits for the test of BOSCH VE pumps with inductive and resistive actuator. This is not a full training concerning the complete overhault of this pump.
The matters of this training are the following:
- Performance features of the products
- Details and installation problems
- Methods of use
- Maintenance
- Practice with the help of DETEQ technicians. The participants will be first instructed and then followed step by step by our technical personnel for practical exercises.
- Location: in Italy at DETEQ headquarter
- Duration: 1 day (8 working hours)
- Maximum number of attenders: 2 diesel specialists having skills on this type of pump
- Is held in English Language
- Individual Certificate of Training is delivered.

Training service for the use of the ERT45R Simulator with the kits for the test of Common rail BOSCH CP2 pumps .This is not a full training concerning the complete overhault of this pump.
The matters of this training are the following:
- Performance features of the products
- Details and installation problems
- Methods of use
- Maintenance
- Practice with the help of DETEQ technicians. The participants will be first instructed and then followed step by step by our technical personnel for practical exercises.
- Location: in Italy at DETEQ headquarter
- Duration: 1 day (8 working hours)
- Maximum number of attenders: 2 diesel specialists having skills on this type of pump
- Is held in English Language
- Individual Certificate of Training is delivered.

Items included:
- Backflow by-pass set for CP2/HP0 pumps(**)
- Test pipes with propers adapters fittings for CP2/HP0 pumps
- External flowmeter for common-rail Hevy-Duty pumps

(**) This item is strictly required as the feeding capacity of the test bench's pump is not enough to ensure the correct feeding of low pressure (440 liters / hour)

Measures pump outlet fuel temperature and allows the pump control valve to be bypassed for faster fuel cooling during testing.