Comparator bearing to survey the rod share BOSCH M,RFS pumps 4 and 5 cylinder.
Similar to BH 1 688 130 130

25 mm conical coupling to drive diesel pumps on any test bench. Length 100, teeth 12 mm
The puller 9463 is recommended to unplug the shaft.

25 mm conical coupling to drive diesel pumps on any test bench. Length 58, teeth 12 mm
The coupling is equipped with internal nut for locking and pulling out the shaft.
Similar to Bh 1 686 430 026 - Bh1 686 430 030

Experience the reliability of the Marbed 9578-B, a robust steel coupling half designed to drive diesel pumps on test benches. Compatible with PE..A, PE..B, P7, PE..MW..S1000, and Bosch reference part 1 686 430 024, it features a 27 mm hex nut for quick removal and versatile application.

Helical conical spare miller diam.22mm Iveco - Fiat 170

Needle valve for ISO test injector type IV (0 681 443 014)

Training service for the use of the ERT45R Simulator with the kits for the test of ZEXEL Covec F1/F2 pumps with electric actuator. This is not a full training concerning the complete overhault of this pump.
The matters of this training are the following:
- Performance features of the products
- Details and installation problems
- Methods of use
- Maintenance
- Practice with the help of DETEQ technicians. The participants will be first instructed and then followed step by step by our technical personnel for practical exercises.
- Location: in Italy at DETEQ headquarter
- Duration: 1 day (8 working hours)
- Maximum number of attenders: 2 diesel specialists having skills on this type of pump
- Is held in English Language
- Individual Certificate of Training is delivered.

TC38 - Injector triggering unit for common-rail injectors.
This unit has been developed as a module, to be used in two main applications:
- in conjunction with the DIT31 test bench, to test any common rail injector
- in conjunction with the ERT45R simulator, to make running the complete common rail system (pump+rail+injectors) on any test bench.
Main features:
- Triggering command for electromagnetic actuators (always provided)
- Triggering command for piezoelectric actuators (provided as optional, by the CRP extension)
- Ready to multiple injection technology (pre-injection, main injection, recovery injection)
- no manual adjustment is required, in fact all the parameters necessary to generate the appropriate pulse(s) are memorized in special smartcards (triggering cards)
- Basic triggering cards are provided to acquire the test parameters of any brand new injector. These figures can be used to compare the test results of injectors having the same part number.
- In addition to the basic triggering cards, specific triggering cards (complete with ready-to-use test data) are available for the some of Bosch, Delphi, and Denso injectors.
- when used with ERT45R simulator, the RPM input is available for the dynamic triggering till 4 injectors, automatically in specific way at different speeds. Multiples of additional 4 injectors can be added, as option.
- 24 months warranty. User's and servicing manual.

Training service for the use of the ERT45R Simulator with the kits for the test of DELPHI DPCN pumps. This is not a full training concerning the complete overhault of this pump.
The matters of this training are the following:
- Performance features of the products
- Details and installation problems
- Methods of use
- Maintenance
- Practice with the help of DETEQ technicians. The participants will be first instructed and then followed step by step by our technical personnel for practical exercises.
- Location: in Italy at DETEQ headquarter
- Duration: 1 day (8 working hours)
- Maximum number of attenders: 2 diesel specialists having skills on this type of pump
- Is held in English Language
- Individual Certificate of Training is delivered.

Guided socket wrench for the valve retaining screw on Denso cr injectors.

N12 wrench socket for the valve retaining screw on Bosch CRIN 3 injectors, 1/2" drive.
Similar to 0 986 613 631

27 mm 12-side socket wrench 1/2" drive for the solenoid retaining nut.
Similaro to Bosch 0 986 613 185.

Assortment of 850 calibrating shims for Bosch CRI and CRIN injectors, with 5 useful tools.
List of contents:
8210-T1, ball handling tool
8210-T2, antimagnetic pair of pliers
8210-T3, ring inserter
8210-T4, valve interter
8210-T5, ring extractor
8210-R04 from 1.20 to 1.66, every 0,02 mm (5 pcs each thickness)
8210-R05 from 1.20 to 1.66, every 0,02 mm (5 pcs each thickness)
8210-R06 from 1.20 to 1.66, every 0,02 mm (5 pcs each thickness)
8210-R07 from 1.20 to 1.66, every 0,02 mm (5 pcs each thickness)
8210-R13 from 1.14 to 1.25, every 0,01 mm (5 pcs each thickness)
8210-R28 from 8.40 to 8.51, every 0,01 mm (5 pcs each thickness)
8210-R29 from 8.40 to 8.51, every 0,01 mm (5 pcs each thickness)
8210-R34 from 0.99 to 1.10, every 0,01 mm (5 pcs each thickness)
8210-R35 from 0.99 to 1.10, every 0,01 mm (5 pcs each thickness)
8210-R41 from 1.19 to 1.10, every 1.30 mm (5 pcs each thickness)

29 mm hexagon socket wrench 1/2" drive for the solenoid retaining nut.
Similar to 0 986 613 633

Training service for the use of the ERT45R Simulator with the kits for the test of Delphi DP2... and DP3.. pumps. This is not a full training concerning the complete overhault of this pump.
The matters of this training are the following:
- Performance features of the products
- Details and installation problems
- Methods of use
- Maintenance
- Practice with the help of DETEQ technicians. The participants will be first instructed and then followed step by step by our technical personnel for practical exercises.
- Location: in Italy at DETEQ headquarter
- Duration: 1 day (8 working hours)
- Maximum number of attenders: 2 diesel specialists having skills on this type of pump
- Is held in English Language
- Individual Certificate of Training is delivered.

The device has a double function: not only to measure the fuel temperature at the outlet of the pump, but also it incorporates a lever valve by which it is possible to exclude the control valve on the pump and speed up the fuel cooling.