Digital bracket integration kit for Bosch Vp44 - Configuration for Bosch VP44.
Items included:
Hub Ø20mm with pulley
Hub Ø25mm with pulley
Test bench flange for BOSCH VP
Adapter for transfer pressure for pumps BOSCH VP
Adapter for transfer pressure for pumps BOSCH VR
Interface for RPM sensor

Training service for the use of the ERT45R Simulator with the kits for the test of DENSO HP0 pumps.

Service features:
- The training course will take place in Italy at DETEQ headquarter
- Duration of 1 day ( 8 working hours )
- Maximum for 2 participants
- Is held in English Language
- The standard training is destined to participants already operators of diesel systems.
- Is excluded the technical instruction on the technology of the components which are object of the machine operativity. This kind of service can be provided only upon agreement with DETEQ.
-At the end of the training will be issued a frequency profit Certificate

The course includes the training provided by DETEQ Technicians, for:
- Performance features of the products
- Details and installation problems
- Methods of use
- Maintenance
- Practice with the help of DETEQ technicians. The participants will be first instructed and then followed step by step by our technical personnel for practical exercises.

Training service for the use of the ERT45R Simulator with the kits for the test of DELPHI DPCN pumps. This is not a full training concerning the complete overhault of this pump.
The matters of this training are the following:
- Performance features of the products
- Details and installation problems
- Methods of use
- Maintenance
- Practice with the help of DETEQ technicians. The participants will be first instructed and then followed step by step by our technical personnel for practical exercises.
- Location: in Italy at DETEQ headquarter
- Duration: 1 day (8 working hours)
- Maximum number of attenders: 2 diesel specialists having skills on this type of pump
- Is held in English Language
- Individual Certificate of Training is delivered.

ERT45R programming kit for testing Zexel Covec-F1 and Covec-F2 electronically controlled rotary distributor pumps. ERT45R controls the electronic regulator and reads the TPS (Timing Position Sensor). Includes the application programming smartcard and 2 m basic cable; application-specific adapter equipment is selected according to the pump configuration.

ERT45R programming kit for testing compatible Zexel VRZ electronically controlled rotary pumps. Includes programming smartcard and 2 m basic cable. Adapter cable 81.06.235 is required and not included. Optional VRZ-specific equipment includes 81.07.007 with 81.01.1001 for electronic advance-piston travel measurement, and 81.01.2042 for pressure-valve pressure and flow testing.

Enables the ERT45R control unit to operate and test Denso ECD-V5 rotary pumps. Includes programming card, 2 m base cable, pump adapter cables and illustrated operating manual. Reference test data may be supplied separately where available.

ERT45R programming kit for operating and testing Denso ECD-V3 and ECD-V4 electronically controlled rotary pumps. One kit covers both V3 and V4. Includes programming card, 2 m base cable, pump adapter cables and illustrated operating manual. Reference test data may be supplied separately where available. Digital phasing equipment is part of the complete test configuration but is not included in this programming kit.

ERT45R programming kit for Bosch Common Rail pumps including CP1H, CP1K, CP3, CP3.3, CP3.4 and CP4 applications. Includes programming smartcard, application adapter cables and illustrated servicing manual. The universal 2 m Common Rail base cable 81.01.3765 is ordered separately. The complete test configuration also requires the ERT45R Common Rail base equipment and the appropriate hydraulic/mechanical connection equipment for the specific pump. Where a pump version requires external lubrication, the test setup must provide it.

ERT45R programming kit for Caterpillar C6.6 and C4.4 Common Rail pump testing. The application provides synchronized injection-valve control, closed-loop rail-pressure control, pulse-wheel and RPM monitoring, pump phasing support and integration with the dedicated high-pressure and flow-measurement circuit.

OTA electrical diagnostic interface for diesel injection pump sensors and actuators. Connect the same application adapter cable used for bench testing, leave the multimeter probes fixed in OTA, and use the two rotary selectors to create the required contact combinations. Fixed measuring points and gold-plated contacts make resistance, continuity and short-circuit checks simpler, faster and more reliable. Function comparable to Bosch 0 986 611 929.

The test bench DIT31 is a modular solution to test the common rail injectors (the additional TC38 triggering unit is required) as well as the conventional and 2 stage (double spring) diesel injectors.
The applied technology allows the test parameters to be determined reliably on each injection, with greater precision and resolution than using on average long test cycles to collect a measurable quantity of fuel.

Main features:
- Main tank 3 lt. with 15 micron filter
- Separated container for the collection of the contaminated liquid
- Large atomization chamber with smoke extraction and halogen lamp
- Pneumatic operated pump unit, the standard version is suitable up to 1400 BAR (compressed air 8-10 BAR is required). Special versions can be installed as optional to generate more pressure and flow.
- Pneumatic vice for the automatic clamping of the injector
- Digital manometer with the reading scale selection (BAR/PSI)
- Printer to generate the test report
- Program for conventional injectors: (1) measurement of the NOP (nozzle opening pressure) and calculation of the back-leakage time.
- Program for Double-spring injectors: (2) measurement of the NOP1 (1st stage) and NOP2 (2nd stage), calculation of the back-leakage time and determination of the K factor.
- 2 programs for common rail injectors: (3) identification of the return flow (leakage time), (4) of the opening delay, the injection time and the injected fuel quantity (dp).
- 24 months warranty. User's and servicing manual in English language.

델파이 DP2.. 및 DP3.. 로터리 디젤 펌프를 테스트하고 프로그래밍하기 위해 ERT45R 시스템을 업그레이드하고, 완전한 전자 시뮬레이션 기능을 탑재했습니다.

Cable for Denso common rail injectors 2 poles

The kit includes:
- Programming card that allows Simulator ERT45R to actuate the necessary functions to test this type of pump.
- adapter cables
- servicing manual with step-by-step illustrated instructions

*** basic cable (81.01.3765) to be ordered separately

The kit includes:
- Programming card that allows Simulator ERT45R to actuate the necessary functions to test this type of pump.
- adapter cables
- servicing manual with step-by-step illustrated instructions

*** basic cable (81.01.3765) to be ordered separately

The kit includes:
- Programming card that allows Simulator ERT45R to actuate the necessary functions to test this type of pump.
- adapter cables
- servicing manual with step-by-step illustrated instructions

*** basic cable (81.01.3765) to be ordered separately

The kit includes:
- programming card that allows ERT45R Simulator to actuate the necessary functions to test this type of pump
- basic cable (2 mt. Length)
- adapter cables 81.04.002 (Fiat), 81.04.003 (Ford), 81.04.004 (Volvo), 81.04.005 (Clio-Kangoo 1st generation), 81.04.006 (Clio-Kangoo 2nd generation).
- servicing manual with step-by-step illustrated instructions
- Registration form to receive the test plan for the calibration of Delphi DPCN pumps. The available test data are supplied separately free of charge, after having accepted the licence agreement.