Important — Product configuration:
- The image shows the original wooden case version.
- The tools are supplied as a complete service set, ready for workshop use.
- The wooden case is currently not available.
- Measurement tools 9572 and 9572-A are not included.

Important — Product configuration
- The image shows the original wooden case version.
- The tools are supplied as a complete service set, ready for workshop use.
- The wooden case is currently not available.
- Item 9573 has been upgraded to the 9664-C modular advance piston travel gauge.
- Some non-critical tools (including 9567) are not included.

25 mm conical coupling to drive diesel pumps on any test bench. Length 58, teeth 12 mm
The coupling is equipped with internal nut for locking and pulling out the shaft.
Similar to Bh 1 686 430 026 - Bh1 686 430 030

Universal puller for 8099-AN, part of 8099-E. Similar to Bosch 0 986 612 782

Assortment of 450 copper washers for the correct positionning the common-rail nozzle holders into the combustion chamber

Kit of 30 copper washers ØE15, ØI 7.7, ≠ 1,5, with 4 gripping points

Training service for the use of the ERT45R Simulator with the kits for the test of DENSO HP0 pumps.

Service features:
- The training course will take place in Italy at DETEQ headquarter
- Duration of 1 day ( 8 working hours )
- Maximum for 2 participants
- Is held in English Language
- The standard training is destined to participants already operators of diesel systems.
- Is excluded the technical instruction on the technology of the components which are object of the machine operativity. This kind of service can be provided only upon agreement with DETEQ.
-At the end of the training will be issued a frequency profit Certificate

The course includes the training provided by DETEQ Technicians, for:
- Performance features of the products
- Details and installation problems
- Methods of use
- Maintenance
- Practice with the help of DETEQ technicians. The participants will be first instructed and then followed step by step by our technical personnel for practical exercises.

Training service for the use of the ERT45R Simulator with the kits for the test of DELPHI DPCN pumps. This is not a full training concerning the complete overhault of this pump.
The matters of this training are the following:
- Performance features of the products
- Details and installation problems
- Methods of use
- Maintenance
- Practice with the help of DETEQ technicians. The participants will be first instructed and then followed step by step by our technical personnel for practical exercises.
- Location: in Italy at DETEQ headquarter
- Duration: 1 day (8 working hours)
- Maximum number of attenders: 2 diesel specialists having skills on this type of pump
- Is held in English Language
- Individual Certificate of Training is delivered.

The Marbed 9680-A, made of durable cast iron with precision machining, delivers exceptional stability and accuracy for centered diesel pump mounting and testing.

The test bench DIT31 is a modular solution to test the common rail injectors (the additional TC38 triggering unit is required) as well as the conventional and 2 stage (double spring) diesel injectors.
The applied technology allows the test parameters to be determined reliably on each injection, with greater precision and resolution than using on average long test cycles to collect a measurable quantity of fuel.

Main features:
- Main tank 3 lt. with 15 micron filter
- Separated container for the collection of the contaminated liquid
- Large atomization chamber with smoke extraction and halogen lamp
- Pneumatic operated pump unit, the standard version is suitable up to 1400 BAR (compressed air 8-10 BAR is required). Special versions can be installed as optional to generate more pressure and flow.
- Pneumatic vice for the automatic clamping of the injector
- Digital manometer with the reading scale selection (BAR/PSI)
- Printer to generate the test report
- Program for conventional injectors: (1) measurement of the NOP (nozzle opening pressure) and calculation of the back-leakage time.
- Program for Double-spring injectors: (2) measurement of the NOP1 (1st stage) and NOP2 (2nd stage), calculation of the back-leakage time and determination of the K factor.
- 2 programs for common rail injectors: (3) identification of the return flow (leakage time), (4) of the opening delay, the injection time and the injected fuel quantity (dp).
- 24 months warranty. User's and servicing manual in English language.

DIT31 4.0은 단순한 선형 업그레이드가 아니라, 작업자 의존형 테스트에서 디지털 방식으로 제어되는 검증 환경으로의 근본적인 전환을 의미합니다. 최신 디젤 전문가를 위해 세심하게 설계된 이 범용 테스트 벤치는 커먼 레일(전자기식 및 압전식)은 물론 기계식 인젝터(기존식, 스텝식, 2단/이중 스프링식) 테스트를 위한 고급 솔루션을 제공합니다.

Decimal comparator 30 mm stroke for rack travel measurement, without spring

델파이 DP2.. 및 DP3.. 로터리 디젤 펌프를 테스트하고 프로그래밍하기 위해 ERT45R 시스템을 업그레이드하고, 완전한 전자 시뮬레이션 기능을 탑재했습니다.

Dial gauge holder with a spill point pipe and an extended rod with returning action.
Application: delivery start measurement on A, B, BV and line BOSCH pumps. Threads: M12x1,5 and M14x1,5

Millesimal digital comparator 15 mm stroke

Disassembly key 14 mm octagonal nozzle retaining nut wrench, 27mm hexagonal drive