Spanner for triangular (3 point) anti tamper bolt fitted on Bosch VE pumps as plug screw (similar to 1 463 452 313) in the pump body for housing the control lever, on VE pumps.
Similar to 0 986 611 758, KDEP 1087, 1 680 110 650

Precision-crafted flange with a 50 mm hub diameter for diesel pump alignment. Compatible with EP / VM, EP / VA, PL 04.. (Mini), NP-VE Zexel, VE..F.., VE..E.., Bosch 1 685 720 062, and the Marbed 9680-A, 9601, and pivotable swivel base Marbed 9260 systems.

Polygonal wrech for selenoid valve EP/VE BOSCH pumps

24 mm hexagonal wrench for selenoid valve for CAV,DPC and BOSCH VE pumps

It creates 25 (3x8 cyl. + 1) compartments of various sizes to house the components of the pumps in line during assembly and disassembly operations.
Thanks to the perforated bottom, the fuel residues inside the pump are collected in the lower tray which can be easily released.

Overall dimensions: approx. 40x50x20 cm

Complete tool box with comparator bearings for the survey of delivery start ratio on Bosch rotating pumps A, B, C and VE type on diesel engines.

Swivel vice for B-BV pumps ( BH 0 986 611 248 - KDEP 2919 )

Fixture set in elegant tool box very usefull for the Bosch EP/VE rotary pumps and P type repair with the addition of LDA supercharged.

Complete tool box for EP-VE BOSCH pumps composed of 15 tools (20 pieces)

Universal jig to shape diam 6 mm high-pressure pipes

Bracket for assembly / disassembly of common rail pumps, on the workbench.

The circular support must be installed on revolving bases (ref. 8132 or 9260).
The system consists of a circular ring support, on which the (removable) bracket with adjustable projection is mounted, which allows to press the tappets. The circular holder holds an interchangeable round flange, which can rotate 360 degrees and can be locked in any position.
The internal flange allows to fix CP1, CP3, CP4, HP1, HP3, HP4, Delphi and VDO pumps.
Similar to 0 986 612 794

As an additional option, the following optional flanges are also available:
- 8131, for CP3.4 pumps
- 9402, for mechanical pumps A, M, VE, DPC

圆形支架必须安装在旋转虎钳 9260 以及标准台虎钳上（通过 9600 块）。
更新的环形支架固定有一个可互换的圆形板，泵安装在此处。 泵沿轴轴线旋转 360 度，并可通过手柄锁定在任何位置。
内部法兰允许安装 PES..A、VA/VE、CAV 和 PES..M 泵。 作为附加选项，还可以订购以下法兰：
- 8130-V 用于共轨泵
- 8131，用于 CP3.4 泵
这个新设计肯定取消并取代9402

Complete conversion kit M 12x1,5

10 mm Oldham coupling to drive diesel pumps on any test bench.