Enlarged configuration of special tools (in wooden case) for the Bosch VE rotary pumps.

High-precision machined cast iron flange with a 68 mm hub diameter. Compatible with PES..AS 151/155, ..S418, PES..M.., VE..F..L19, PES... MW pumps (MERCEDES, VOLVO etc.) pumps, Bosch 1 685 720 018, and Marbed mounting systems for efficient pump testing and maintenance.

Spanner for triangular (3 point) anti tamper bolt fitted on Bosch VE pumps as plug screw (similar to 1 463 452 313) in the pump body for housing the control lever, on VE pumps.
Similar to 0 986 611 758, KDEP 1087, 1 680 110 650

Precision-crafted flange with a 50 mm hub diameter for diesel pump alignment. Compatible with EP / VM, EP / VA, PL 04.. (Mini), NP-VE Zexel, VE..F.., VE..E.., Bosch 1 685 720 062, and the Marbed 9680-A, 9601, and pivotable swivel base Marbed 9260 systems.

Polygonal wrech for selenoid valve EP/VE BOSCH pumps

24 mm hexagonal wrench for selenoid valve for CAV,DPC and BOSCH VE pumps

It creates 25 (3x8 cyl. + 1) compartments of various sizes to house the components of the pumps in line during assembly and disassembly operations.
Thanks to the perforated bottom, the fuel residues inside the pump are collected in the lower tray which can be easily released.

Overall dimensions: approx. 40x50x20 cm

Complete tool box with comparator bearings for the survey of delivery start ratio on Bosch rotating pumps A, B, C and VE type on diesel engines.

Swivel vice for B-BV pumps ( BH 0 986 611 248 - KDEP 2919 )

Fixture set in elegant tool box very usefull for the Bosch EP/VE rotary pumps and P type repair with the addition of LDA supercharged.

Complete tool box for EP-VE BOSCH pumps composed of 15 tools (20 pieces)

Universal jig to shape diam 6 mm high-pressure pipes

Bracket for assembly / disassembly of common rail pumps, on the workbench.

The circular support must be installed on revolving bases (ref. 8132 or 9260).
The system consists of a circular ring support, on which the (removable) bracket with adjustable projection is mounted, which allows to press the tappets. The circular holder holds an interchangeable round flange, which can rotate 360 degrees and can be locked in any position.
The internal flange allows to fix CP1, CP3, CP4, HP1, HP3, HP4, Delphi and VDO pumps.
Similar to 0 986 612 794

As an additional option, the following optional flanges are also available:
- 8131, for CP3.4 pumps
- 9402, for mechanical pumps A, M, VE, DPC

सर्कुलर सपोर्ट को स्विवेल वाइस 9260 के साथ-साथ एक मानक बेंच वाइस (9600 ब्लॉक के माध्यम से) पर स्थापित किया जाना चाहिए।
नवीनीकृत रिंग ब्रैकेट में एक विनिमेय गोलाकार प्लेट होती है, जहां पंप लगा होता है। पंप का घूर्णन शाफ्ट अक्ष के साथ 360 डिग्री है और इसे हैंडल द्वारा किसी भी स्थिति में लॉक किया जा सकता है।
आंतरिक निकला हुआ किनारा PES..A, VA/VE, CAV, और PES..M पंप माउंट करने की अनुमति देता है। एक अतिरिक्त विकल्प के रूप में, निम्नलिखित फ्लैंज को भी ऑर्डर किया जा सकता है:
- सामान्य रेल पंपों के लिए 8130-वी
- 8131, सीपी3.4 पंपों के लिए
यह नया डिज़ाइन निश्चित रूप से 9402 को रद्द और प्रतिस्थापित करता है

Complete conversion kit M 12x1,5

10 mm Oldham coupling to drive diesel pumps on any test bench.