Skip to Content

Explore Premium Tools and Solutions for Diesel Pump and Injector Repairs

SHOP BY CATEGORY: HAND TOOLS, TEST EQUIPMENT, AND MORE (E-COMMERCE)


EUR (ecommerce)
Sıralama: Öne Çıkan
Spare miller
Helical conical spare miller diam.22mm Iveco - Fiat 170
74,00 € 0 EUR
Needle valve
Needle valve for ISO test injector type IV (0 681 443 014)
56,00 € 0 EUR
Comparator bearing
Extended comparator bearing to survey the stroke on BOSCH EP…VE rotative pumps 8x1 mm. (KDEP1126)
28,00 € 0 EUR
Puller
Self-threading puller for oil seal on diam.17 shaft (Ref. KDEP 1113)
44,00 € 0 EUR
Reduction
Comparator reduction from 3 mm to 2,5 mm
23,00 € 0 EUR
Balancing comparator bearing 8x1
EPVA...VE pumps timing: dial gauge rocking bracket, for the indirect measurement of the plunger stroke.
Similar to Denso 95095-10400. Toyota 09275-54011
84,00 € 0 EUR
Portainiettore completo (ISO 7440) tipo IX - tar. 250 BAR - past.ø0.5 mm
390,00 € 0 EUR
Motoring coupling
Motoring coupling 85 length, cone ø35, cone is 40 mm in depth, teeth 12 mm, for P7100/7800 - P8500 BH pumps (similar BH ref. 1686430040)
160,00 € 0 EUR
Marbed 9685-A Coupling System Half - Steel Tool for Diesel Pump Test Bench Operations
The Marbed 9685-A is a robust steel coupling half designed for driving diesel pumps on test benches. Built for conical shafts (30 mm nominal diameter), it is compatible with PE..P, P10, P9 diesel injection pumps, and Bosch reference part 1 686 430 034. Use the Marbed 9463 puller for simple and effective removal.
138,00 € 0 EUR
Toothed coupling diam.19
Toothed coupling for BH PES...RSF pumps (Mercedes 190D - 250D)
104,00 € 0 EUR
Needle valve
91,00 € 0 EUR
Complete test injector
Complete test injector similar to 1 688 901 116 (ISO 14681) type IX - opening pressure 207 BAR - orifice plate ø 0,5 mm
390,00 € 0 EUR
Polverizzatore per tipo VIII (1 688 901 988)
67,00 € 0 EUR
Complete Test Injector (ISO 14681) type VIII - 147 BAR
284,00 € 0 EUR
High pressure test pipes for test bench (unbent), covered by rubber
Specifications:
- external diameter: 8 mm
- internal diameter: 3 mm
- thickness: 2,5 mm
- length: 1000 mm
- nuts: M14x1,5 mm - M14x1,5 mm
Similar to Bosch 1 680 750 075, Hartridge AHP124
78,00 € 0 EUR
High pressure test pipes for test bench (unbent) - covered by rubber
Specifications:
- external diameter: 6 mm
- internal diameter: 3 mm
- thickness: 1,5 mm
- length: 600 mm
- nuts: M14x1,5 mm - M14x1,5 mm
Similar to Bosch reference 1680750015, Hartridge AHP121
48,00 € 0 EUR
Steel test pipe
High pressure test pipes for test bench (unbent), covered by rubber
Specifications:
- external diameter: 6 mm
- internal diameter: 2 mm
- thickness: 2 mm
- length: 600 mm
- nuts: M14x1,5 mm - M12x1,5 mm
Similar to Bosch reference 1 680 750 014, Hartridge AHP117
48,00 € 0 EUR
Portainiettore completo (ISO 14681) tipo VII - tar. 250 BAR - past.ø0.5 mm
ISO test injector 1688 901 110
288,00 € 0 EUR
Portainiettore completo (ISO 14681) tipo VII - tar. 207 BAR - past.ø0.5 mm
288,00 € 0 EUR
ISO Test injector
Complete test injector (ISO 14681) similar to BH 1 688 901 106 type VII- opening pressure 250 BAR - orifice plate ø 0,8 mm
288,00 € 0 EUR