Skip to Content

ECOMMERCE


EUR (ecommerce)
Sıralama: Öne Çıkan
Connecting interface to drive the stroke rod of the Denso and Zexel MD/KD pumps, on 9562-M1 cambox.
48,00 € 0 EUR
Connecting interface to drive the stroke rod of the camshaftless pumps, on 9562-M1 cambox.
48,00 € 0 EUR
Bracket
Plate for BOSCH 1 cyl.pump with location clamp for determining the delivery start ratio, with rod guide
285,00 € 0 EUR
Universal basic cambox
Cambox universal base to house camshaftless pumps up to 4 cylinders on the test bench.
The cambox must be configured correctly (mounting plate, thickness - if required -, camshaft, control lever connection, sliding rod), depending on the type of pump to be tested.
647,00 € 0 EUR
Chiave a bussola dentata_
Insert external diameter 6,3 mm.with inside hole diam.2,8 mm.on Stanadyne pumps.
18,00 € 0 EUR
Bit for the governor control cover screw on DP2100 pumps. Similar to 7244-438.
18,00 € 0 EUR
Comparator holder to measure the travel on the governor magnet. Similar to 0 986 612 657
97,00 € 0 EUR
Inseritore paraolio albero comando pompa DPC
Oil seal inserter for pump drive shaft
54,00 € 0 EUR
Supporto comparatore brevettato
201,00 € 0 EUR
Assembly gauge for testing the position of the rack travel sensor short circuiting ring on M pumps with electronic regulator. Similar to Bosch 0 986 612 590, KDEP 1909.
107,00 € 0 EUR
Dial gauge holder.
Comparator bearing to survey the rod stroke for A-B-BV pumps
54,00 € 0 EUR
Puller
Sliding hammer with adapter to extract Bosch CRIN injectors on Iveco Eurocargo
104,00 € 0 EUR
Checking gauge
Checking gauge for the protrusion level of 25 and 35 mm camshaft cones
Similar to Bosch reference 0 986 611 278, KDEP 2924.
82,00 € 0 EUR
Surveying gauge
Surveying gauge for cam shaft protusion level diam.17 and diam.20
Similar to Bosch reference 0 986 611 139, KDEP 2899
36,00 € 0 EUR
Comparator bearing
Comparator bearing to survey the rod share with connections for BOSCH P, P7100,8500,MW BOSCH pumps
142,00 € 0 EUR
Single reamer for the shaft bushing of the VE pump (nominal diameter 20 mm). Similar to 0 986 611 958
138,00 € 0 EUR
Single reamer for the shaft bushing of the VE pump (nominal diameter 17 mm). Similar to 0 986 611 951
138,00 € 0 EUR
Marbed 9873-P Protection Cover - Secure Safety with Sliding Design
The Marbed 9873-P Protection Cover ensures complete safety during high-speed operations of the 9873 and 9873-R coupling systems. Featuring a two-part sliding design for ease of clamping screw adjustments, it is a practical and high-quality alternative to Bosch 1 685 510 148.
160,00 € 0 EUR
Pre-stroke measuring device, to adjust the delivery start and measure the tappet clearance on the TDC, in the PE (S) .. P, with M24 x 1.5 connection. Similar to BH 1688130085 - 1688130112 -1 688 040 071
118,00 € 0 EUR
Dial gauge holder for delivery start measurement on A, B pumps
Dial gauge holder with a spill point pipe and an extended rod with returning action.
Application: delivery start measurement on A, B, BV and line BOSCH pumps. Threads: M12x1,5 and M14x1,5
96,00 € 0 EUR