Steel Test Piping (ØE 6 ≠1,85 l=600mm) M14x1,5/14x1,5 common rail application. Covered with rubber

The kit includes:
- program card to allow the ERT45R Simulator to actuate the necessary functions to test this type of pumps
- Set of cables for C/rail DENSO HP0 pumps: NE Sensor flanged (094000-0342) and NE with 2 sensors (094000-0240).
- Set of cables for C/rail DENSO HP0 pumps G Sensor (094000-480)
- Illustrated step-by-step instructions manual

Set of hydraulic connections for BOSCH CP2 pumps. Items included:
Holder adapter for overflow valve and pipe connections for transfer pressure without manometer.
Cable for camshaft pulse control of pumps BOSCH CP2
Test injector ref. 1 688 901 105
High pressure pipes for BOSCH CP2 application
Set of pipes of connections for BOSCH CP2 application

Set of hydraulic connections for DENSO HP0 pumps. Items included:
Holder adapter for overflow valve and pipe connections for transfer pressure without manometer.
Cap for PCV valve
High pressure pipes for DENSO HP0 application
Set of pipes of connections for DENSO HP0 application

ERT45R test yönteminin temel bir bileşeni olarak Test Akümülatörü, basınç kontrol valfi tarafından boşaltılan yakıtın ayrılmasını sağlayan güvenilir bir bileşendir. Bu işlevsellik, test süreci boyunca tutarlı basınç seviyelerinin korunması için hayati önem taşır.

Sensor for the test bench shaft for application Caterpillar C6.6

This service is a comprehensive opportunity aimed at enhancing the technical skills of diesel injection Specialists.
This one-day course, spanning 8 working hours, will be conducted in English at the DETEQ headquarters in Italy, accommodating a maximum of 2 participants.
Throughout the course, participants will engage with experienced DETEQ technicians who will cover essential topics including the performance features of the products, installation challenges, proper usage methods, and maintenance practices. The hands-on practicality of this training is crucial; participants will receive step-by-step guidance from our technical personnel during practical exercises. At the end of the session, each attendee will be awarded a certificate, confirming their successful participation and knowledge gained during the training. This initiative not only improves operational competency but also empowers technicians to maximize the efficiency and reliability of their diesel diagnostic systems.

Training service for the use of the ERT45R Simulator with the kits for the test of BOSCH VP44/VR30 pumps.

Service features:
- The training course will take place in Italy at DETEQ headquarter
- Duration of 1 day ( 8 working hours )
- Maximum for 2 participants
- Is held in English Language
- The standard training is destined to participants already operators of diesel systems.
- Is excluded the technical instruction on the technology of the components which are object of the machine operativity. This kind of service can be provided only upon agreement with DETEQ.
-At the end of the training will be issued a frequency profit Certificate

The course includes the training provided by DETEQ Technicians, for:
- Performance features of the products
- Details and installation problems
- Methods of use
- Maintenance
- Practice with the help of DETEQ technicians. The participants will be first instructed and then followed step by step by our technical personnel for practical exercises.

Training for the use of the ERT45R simulator with the programming kit for testing the Bosch CP1/CP3/CP4 common rail pumps.

Service features:
- The training course will take place in Italy at the DETEQ site
- Duration of 1 day
- Maximum for 2 participants
- It is taught in English
- Standard training is intended for participants who are already operators of diesel systems.
- Technical instructions on the technology of the components that are the object of the operation of the machine are excluded. This type of service can only be provided with DETEQ.
- At the end of the training a certificate of attendance will be issued

The course includes training provided by DETEQ technicians, for:
- Performance characteristics of the products
- Details and installation problems
- Methods of use
- Maintenance
- Practice with the help of DETEQ technicians. Participants will first be instructed and followed by our technical staff for practical exercises.

Training service for the use of the ERT45R Simulator with the kits for the test of Delphi DP2... and DP3.. pumps. This is not a full training concerning the complete overhault of this pump.
The matters of this training are the following:
- Performance features of the products
- Details and installation problems
- Methods of use
- Maintenance
- Practice with the help of DETEQ technicians. The participants will be first instructed and then followed step by step by our technical personnel for practical exercises.
- Location: in Italy at DETEQ headquarter
- Duration: 1 day (8 working hours)
- Maximum number of attenders: 2 diesel specialists having skills on this type of pump
- Is held in English Language
- Individual Certificate of Training is delivered.

Training service for the use of the ERT45R Simulator with the kits for the test of DENSO ECD-V3/V4 & DENSO ECD-V5 pumps..

Service features:
- The training course will take place in Italy at DETEQ headquarter
- Duration of 1 day ( 8 working hours )
- Maximum for 2 participants
- Is held in English Language
- The standard training is destined to participants already operators of diesel systems.
- Is excluded the technical instruction on the technology of the components which are object of the machine operativity. This kind of service can be provided only upon agreement with DETEQ.
-At the end of the training will be issued a frequency profit Certificate

The course includes the training provided by DETEQ Technicians, for:
- Performance features of the products
- Details and installation problems
- Methods of use
- Maintenance
- Practice with the help of DETEQ technicians. The participants will be first instructed and then followed step by step by our technical personnel for practical exercises.

Training service for the use of the ERT45R Simulator with the kits for the test of ZEXEL Covec F1/F2 pumps with electric actuator. This is not a full training concerning the complete overhault of this pump.
The matters of this training are the following:
- Performance features of the products
- Details and installation problems
- Methods of use
- Maintenance
- Practice with the help of DETEQ technicians. The participants will be first instructed and then followed step by step by our technical personnel for practical exercises.
- Location: in Italy at DETEQ headquarter
- Duration: 1 day (8 working hours)
- Maximum number of attenders: 2 diesel specialists having skills on this type of pump
- Is held in English Language
- Individual Certificate of Training is delivered.

Training service for the use of the ERT45R Simulator with the kits for the test of ZEXEL VRZ pumps. This is not a full training concerning the complete overhault of this pump.
The matters of this training are the following:
- Performance features of the products
- Details and installation problems
- Methods of use
- Maintenance
- Practice with the help of DETEQ technicians. The participants will be first instructed and then followed step by step by our technical personnel for practical exercises.
- Location: in Italy at DETEQ headquarter
- Duration: 1 day (8 working hours)
- Maximum number of attenders: 2 diesel specialists having skills on this type of pump
- Is held in English Language
- Individual Certificate of Training is delivered

Training service for the use of the ERT45R Simulator with the kits for the test of BOSCH VE pumps with inductive and resistive actuator. This is not a full training concerning the complete overhault of this pump.
The matters of this training are the following:
- Performance features of the products
- Details and installation problems
- Methods of use
- Maintenance
- Practice with the help of DETEQ technicians. The participants will be first instructed and then followed step by step by our technical personnel for practical exercises.
- Location: in Italy at DETEQ headquarter
- Duration: 1 day (8 working hours)
- Maximum number of attenders: 2 diesel specialists having skills on this type of pump
- Is held in English Language
- Individual Certificate of Training is delivered.

Training service for the use of the ERT45R Simulator with the kits for the test of Common rail BOSCH CP2 pumps .This is not a full training concerning the complete overhault of this pump.
The matters of this training are the following:
- Performance features of the products
- Details and installation problems
- Methods of use
- Maintenance
- Practice with the help of DETEQ technicians. The participants will be first instructed and then followed step by step by our technical personnel for practical exercises.
- Location: in Italy at DETEQ headquarter
- Duration: 1 day (8 working hours)
- Maximum number of attenders: 2 diesel specialists having skills on this type of pump
- Is held in English Language
- Individual Certificate of Training is delivered.

Items included:
- Backflow by-pass set for CP2/HP0 pumps(**)
- Test pipes with propers adapters fittings for CP2/HP0 pumps
- External flowmeter for common-rail Hevy-Duty pumps

(**) This item is strictly required as the feeding capacity of the test bench's pump is not enough to ensure the correct feeding of low pressure (440 liters / hour)

Measures pump outlet fuel temperature and allows the pump control valve to be bypassed for faster fuel cooling during testing.

Zexel VRZ kit for testing the pressure and flow of valve out and valve head