17 mm octagonal nozzle retaining nut wrench, 27mm hexagonal drive

Guided socket wrench for dismounting the internal ring-nut of the CR Siemens injector on Ford and Peugeot.

Assortment of 850 calibrating shims for Bosch CRI and CRIN injectors.
List of contents:
8210-R04 from 1.20 to 1.66, every 0,02 mm (5 pcs each thickness)
8210-R05 from 1.20 to 1.66, every 0,02 mm (5 pcs each thickness)
8210-R06 from 1.20 to 1.66, every 0,02 mm (5 pcs each thickness)
8210-R07 from 1.20 to 1.66, every 0,02 mm (5 pcs each thickness)
8210-R13 from 1.14 to 1.25, every 0,01 mm (5 pcs each thickness)
8210-R28 from 8.40 to 8.51, every 0,01 mm (5 pcs each thickness)
8210-R29 from 8.40 to 8.51, every 0,01 mm (5 pcs each thickness)
8210-R34 from 0.99 to 1.10, every 0,01 mm (5 pcs each thickness)
8210-R35 from 0.99 to 1.10, every 0,01 mm (5 pcs each thickness)
8210-R41 from 1.19 to 1.10, every 0.01 mm (5 pcs each thickness)

N10 wrench socket for the valve retaining screw on Bosch CRIN 3 injectors, 1/2" drive.
Similar to 0 986 613 632

20 mm octagonal nozzle retaining nut wrench, 27mm hexagonal drive. Similar to Bosch 0 986 613 458.

27 mm hexagon socket wrench 1/2" drive for the solenoid retaining nut of Industrial Denso and Siemens Injectors

Torque wrench
Working range: 20-200 N·m // 15-150 lbf·ft
Rectangular 14 x 18 mm Drive
Length 475 mm
Scale divisions 1 N·m

Drive converter from rectangular 14 x 18 mm connection to 1/2" square

8225-CP3 helps to determine if the ZME valve can be retained, instead of installing a new one, on CP3 and CP1-H pumps.
Similar to 0 986 613 270

New version of the b racket 9562-S. This revised design is suitable for the PFM1P100 pumps and the 0 141 401 106 as well.

Kit to determine if the ZME valve can be retained, instead of installing a new one, on CP4 pumps.

Splined coupling to drive CP3.4 (MAN) pumps on any test bench.
Similar to 1 685 702 092

15 mm octagonal nozzle retaining nut wrench, 27mm hexagonal drive

Flexible pipe ( cr 2500BAR) to connect the high pressure delivery from the pump outlet to the rail. Nuts 14x15 / 14x1,5. Similar to 1 680 712 324

This device allows to monitor the pump body pressure (5 BAR).
It is also equipped with ball valve, to measure the negative pressure generated by the pump.
Caution: Not all test benches are able to supply the amount of flow required by the comon rail pumps. Therefore, it is crucial to monitor that, during the test, the pump does not go into cavitation.