Tool for the expulsion of the pump sprocket on BMW 520 TDS, 320D.
Similar to 0 986 613 170

Toolset for CP3 pumps. The following tools are included:
8133 - Clamping tool set for the pumping elements
8171 - Set of 6 sealing ring inserters
8172 - Puller for the shaft sealing ring (25mm)
8173 - Set of 7 O-ring inserters

Special tool for the disassembly and the aligned mounting of the nozzle and for preserving the pins from breaking during the rotation of the nozzle nut.
The tool is equipped with analogic gauge for the reference of the force applied on the injector body.
Similar to 0 986 610 130

Splined coupling to drive CP3.4 (MAN) pumps on any test bench.
Similar to 1 685 702 092

Splined socket wrench for the low-pressure connections. Hole diam 10 mm ( BH 0 986 611 489)

Splined socket wrench for the low-pressure connections. Hole diam 12 mm ( BH 0 986 612 991 )

High pressure swivel fitting Male 14x1,5 - Female 14x1,5

High pressure swivel fitting Male 14x1,5 - Female 12x1,5

Set of 3 tensioners for clamping the pumping elements on CP3 pumps.
Similar to 0 986 612 427

Sensor for the test bench shaft for application Caterpillar C6.6

Kit to determine if the ZME valve can be retained, instead of installing a new one, on CP4 pumps.

8225-CP3 helps to determine if the ZME valve can be retained, instead of installing a new one, on CP3 and CP1-H pumps.
Similar to 0 986 613 270

Transistored ultrasonic box with automatic setting. Made of stainless steel with a capacity of 6,4 litres for special fluid for components.
The box is equipped both with heater and timer and it is supplied with a stainless steel basket for containing parts and 4 fluid bottles.
Technical features:
- inside dimension: cm 32,4*17,8*27,9
- frequency 60 kHz
- Capacity 6,4 litres
- 135 W - 335 W peak

Transistored ultrasonic box with automatic setting. Made of stainless steel with a capacity of 1,9 litres for special fluid for components.
The box is equipped both with heater and timer and it is supplied with a stainless steel basket for containing parts and 4 fluid bottles.
Technical features: inside dimension: cm 14,9x13,6x10,2 frequency 60Hz Capacity 1,9 litres - 45 W - 127 W peak - made in USA.

Okrągły wspornik musi być zainstalowany na obrotowych podstawach (nr 8132 lub 9260).
System składa się z okrągłego wspornika pierścieniowego, na którym zamocowany jest (zdejmowany) wspornik z regulowanym występem, który umożliwia dociskanie popychaczy. Okrągły uchwyt posiada wymienny okrągły kołnierz, który może się obracać o 360 stopni i można go zablokować w dowolnej pozycji.
Kołnierz wewnętrzny pozwala na montaż pomp CP1, CP3, CP4, HP1, HP3, HP4, Delphi i VDO.
Podobny do 0 986 612 794

Jako dodatkowa opcja dostępne są również następujące opcjonalne kołnierze:
- 8131, dla pomp CP3.4
- 9402, do pomp mechanicznych A, M, VE, DPC