Skip to Content

ECOMMERCE


  1. Produkty
  2. Atrakcja

Atrakcja

Product highlighting

  • In a huge range of products, highlighting just some of them carries a significant responsibility. Nevertheless, the subcategories listed on the left offer diverse perspectives, aiming to inspire and enhance the search process. 

 

EUR (ecommerce)
Sortuj według: Polecane

Atrakcja

Bracket
Plate for BOSCH 1 cyl.pump with location clamp for determining the delivery start ratio, with rod guide
Uniwersalna podstawowa skrzynka do przechowywania pomp bez wałka rozrządu do 4 cylindrów, na stanowisku badawczym.Cambox powinien być odpowiednio skonfigurowany (płyta montażowa, przekładka, wałek rozrządu, wtyczka dźwigni sterującej, pręt przesuwny), w zależności od rodzaju pompy, która ma być testowana.
Cambox universal base to house camshaftless pumps up to 4 cylinders on the test bench.
The cambox must be configured correctly (mounting plate, thickness - if required -, camshaft, control lever connection, sliding rod), depending on the type of pump to be tested.
Chiave a bussola dentata_
Insert external diameter 6,3 mm.with inside hole diam.2,8 mm.on Stanadyne pumps.
Puller
Sliding hammer with adapter to extract Bosch CRIN injectors on Iveco Eurocargo
Comparator bearing
Comparator bearing to survey the rod share with connections for BOSCH P, P7100,8500,MW BOSCH pumps
Pre-stroke measuring device, to adjust the delivery start and measure the tappet clearance on the TDC, in the PE (S) .. P, with M24 x 1.5 connection. Similar to BH 1688130085 - 1688130112 -1 688 040 071
Supporto comparatore
Comparator bearing to survey the rod share BOSCH M,RFS pumps 4 and 5 cylinder.
Similar to BH 1 688 130 130
25 mm conical coupling
25 mm conical coupling to drive diesel pumps on any test bench. Length 100, teeth 12 mm
The puller 9463 is recommended to unplug the shaft.
Conical coupling
25 mm conical coupling to drive diesel pumps on any test bench. Length 58, teeth 12 mm
The coupling is equipped with internal nut for locking and pulling out the shaft.
Similar to Bh 1 686 430 026 - Bh1 686 430 030
Marbed 9578-B Coupling System Half - Professional Steel Tool for Diesel Pump Testing
Experience the reliability of the Marbed 9578-B, a robust steel coupling half designed to drive diesel pumps on test benches. Compatible with PE..A, PE..B, P7, PE..MW..S1000, and Bosch reference part 1 686 430 024, it features a 27 mm hex nut for quick removal and versatile application.
Spare miller
Helical conical spare miller diam.22mm Iveco - Fiat 170
Needle valve
Needle valve for ISO test injector type IV (0 681 443 014)
Kurs treningowy
Training service for the use of the ERT45R Simulator with the kits for the test of ZEXEL Covec F1/F2 pumps with electric actuator. This is not a full training concerning the complete overhault of this pump.
The matters of this training are the following:
- Performance features of the products
- Details and installation problems
- Methods of use
- Maintenance
- Practice with the help of DETEQ technicians. The participants will be first instructed and then followed step by step by our technical personnel for practical exercises.
- Location: in Italy at DETEQ headquarter
- Duration: 1 day (8 working hours)
- Maximum number of attenders: 2 diesel specialists having skills on this type of pump
- Is held in English Language
- Individual Certificate of Training is delivered.
Corso di formazione per l'utilizzo del simulatore ERT45R e del kit per la prova delle pompe Delphi DPCN.
Training service for the use of the ERT45R Simulator with the kits for the test of DELPHI DPCN pumps. This is not a full training concerning the complete overhault of this pump.
The matters of this training are the following:
- Performance features of the products
- Details and installation problems
- Methods of use
- Maintenance
- Practice with the help of DETEQ technicians. The participants will be first instructed and then followed step by step by our technical personnel for practical exercises.
- Location: in Italy at DETEQ headquarter
- Duration: 1 day (8 working hours)
- Maximum number of attenders: 2 diesel specialists having skills on this type of pump
- Is held in English Language
- Individual Certificate of Training is delivered.
Guided socket wrench
Guided socket wrench for the valve retaining screw on Denso cr injectors.
Wrench socket
N12 wrench socket for the valve retaining screw on Bosch CRIN 3 injectors, 1/2" drive.
Similar to 0 986 613 631
12-side socket wrench
27 mm 12-side socket wrench 1/2" drive for the solenoid retaining nut.
Similaro to Bosch 0 986 613 185.
Inserto esagono 17 mm per chiave dinamometrica 9785-C
Box of calibrating shims and tools
Assortment of 850 calibrating shims for Bosch CRI and CRIN injectors, with 5 useful tools.
List of contents:
8210-T1, ball handling tool
8210-T2, antimagnetic pair of pliers
8210-T3, ring inserter
8210-T4, valve interter
8210-T5, ring extractor
8210-R04 from 1.20 to 1.66, every 0,02 mm (5 pcs each thickness)
8210-R05 from 1.20 to 1.66, every 0,02 mm (5 pcs each thickness)
8210-R06 from 1.20 to 1.66, every 0,02 mm (5 pcs each thickness)
8210-R07 from 1.20 to 1.66, every 0,02 mm (5 pcs each thickness)
8210-R13 from 1.14 to 1.25, every 0,01 mm (5 pcs each thickness)
8210-R28 from 8.40 to 8.51, every 0,01 mm (5 pcs each thickness)
8210-R29 from 8.40 to 8.51, every 0,01 mm (5 pcs each thickness)
8210-R34 from 0.99 to 1.10, every 0,01 mm (5 pcs each thickness)
8210-R35 from 0.99 to 1.10, every 0,01 mm (5 pcs each thickness)
8210-R41 from 1.19 to 1.10, every 1.30 mm (5 pcs each thickness)
CHIAVE ESAGONO 30 PER INIETTORI COMMON-RAIL