Zum Inhalt springen

ECOMMERCE


Repair systems

Common Rail Hand-tools and Test Equipment

  • This macro category organizes products for Common rail pumps and injectors into subcategories (on the left). 
  • Subcategories enable you to progressively refine your search for specific products.

 

Splined coupling to drive CP3.4 (MAN) pumps on any test bench.Similar to 1 685 702 092
Splined coupling to drive CP3.4 (MAN) pumps on any test bench.
Similar to 1 685 702 092
166,00 € 0 EUR
Bussola 1/2 per Torx 50
Torx bit
Similar to 0 986 613 145
18,00 € 0 EUR
Disassembly key
15 mm octagonal nozzle retaining nut wrench, 27mm hexagonal drive
23,00 € 0 EUR
Flexible pipe
Flexible pipe ( cr 2500BAR) to connect the high pressure delivery from the pump outlet to the rail. Nuts 14x15 / 14x1,5. Similar to 1 680 712 324
482,00 € 0 EUR
Estrattore per CP1
Extraction tool for the cap on the rod-type filter on common rail high-pressure pump CP1H with gear pump.
Similar to 0 986 613 165
87,00 € 0 EUR
Puller
Auszieherwerkzeug für die Filterkappe der Common-Rail-Hochdruckpumpen CP1H mit Zahnradpumpe.
Ähnlich wie Bosch 0 986 613 162.
57,00 € 0 EUR
Lube
Additional external LUBE.
*** Required if the test bench in use is not equipped with a lubricating system.
5.190,00 € 0 EUR
Kit controllo depressione con manovuotometro.
This device allows to monitor the pump body pressure (5 BAR).
It is also equipped with ball valve, to measure the negative pressure generated by the pump.
Caution: Not all test benches are able to supply the amount of flow required by the comon rail pumps. Therefore, it is crucial to monitor that, during the test, the pump does not go into cavitation.
470,00 € 0 EUR
Clamping system
System to clamp injectors by plates.
129,00 € 0 EUR
Swivel fitting
High pressure swivel fitting Male 14x1,5 - Female 12x1,5
90,00 € 0 EUR
Swivel fitting
High pressure swivel fitting Male 14x1,5 - Female 14x1,5
90,00 € 0 EUR
Flange
Warrants the centered clamping of the pumps having 50 mm hub diameter, on any test bench. The flange requires 9680-A universal cradle or similar.
122,00 € 0 EUR
186,00 € 0 EUR
50,00 € 0 EUR
Mounting/driving set for CP3.4 (MAN), CP2 and HP0 pumps
Ready for external lubrication by oil.
478,00 € 0 EUR
68,00 € 0 EUR
CAT centering flange
CATERPILLAR pump centering flange with lubrication
282,00 € 0 EUR