ERT45R programming kit for Bosch Common Rail pumps including CP1H, CP1K, CP3, CP3.3, CP3.4 and CP4 applications. Includes programming smartcard, application adapter cables and illustrated servicing manual. The universal 2 m Common Rail base cable 81.01.3765 is ordered separately. The complete test configuration also requires the ERT45R Common Rail base equipment and the appropriate hydraulic/mechanical connection equipment for the specific pump. Where a pump version requires external lubrication, the test setup must provide it.

ERT45R programming kit for Caterpillar C6.6 and C4.4 Common Rail pump testing. The application provides synchronized injection-valve control, closed-loop rail-pressure control, pulse-wheel and RPM monitoring, pump phasing support and integration with the dedicated high-pressure and flow-measurement circuit.

OTA electrical diagnostic interface for diesel injection pump sensors and actuators. Connect the same application adapter cable used for bench testing, leave the multimeter probes fixed in OTA, and use the two rotary selectors to create the required contact combinations. Fixed measuring points and gold-plated contacts make resistance, continuity and short-circuit checks simpler, faster and more reliable. Function comparable to Bosch 0 986 611 929.

The kit includes:
- Programming card that allows Simulator ERT45R to actuate the necessary functions to test this type of pump.
- adapter cables
- servicing manual with step-by-step illustrated instructions

*** basic cable (81.01.3765) to be ordered separately

The kit includes:
- Programming card that allows Simulator ERT45R to actuate the necessary functions to test this type of pump.
- adapter cables
- servicing manual with step-by-step illustrated instructions

*** basic cable (81.01.3765) to be ordered separately

The kit includes:
- Programming card that allows Simulator ERT45R to actuate the necessary functions to test this type of pump.
- adapter cables
- servicing manual with step-by-step illustrated instructions

*** basic cable (81.01.3765) to be ordered separately

The kit includes:
- programming card that allows ERT45R Simulator to actuate the necessary functions to test this type of pump
- basic cable (2 mt. Length)
- adapter cables 81.04.002 (Fiat), 81.04.003 (Ford), 81.04.004 (Volvo), 81.04.005 (Clio-Kangoo 1st generation), 81.04.006 (Clio-Kangoo 2nd generation).
- servicing manual with step-by-step illustrated instructions
- Registration form to receive the test plan for the calibration of Delphi DPCN pumps. The available test data are supplied separately free of charge, after having accepted the licence agreement.

تعد وحدة التحكم ERT45R جوهر نظام الاختبار العالمي المصمم لمضخات حقن الديزل التي يتم التحكم فيها إلكترونيًا، والمتوافقة مع أي منصة اختبار. لقد تم تطوير هذا المحاكي المبتكر من خلال أبحاث مكثفة، مما أدى إلى جهاز متعدد الاستخدامات قابل للبرمجة عبر البطاقات الذكية (بطاقات الرقائق الدقيقة). تتوافق هذه الميزة تمامًا مع متطلبات التشغيل الحديثة.
يعد ERT45R استثمارًا طويل الأجل، مما يسمح بالتوسع بسهولة من خلال مجموعة مختارة من مجموعات البرمجة المتاحة — 21 خيارًا متاحًا حاليًا. تشتمل كل مجموعة على بطاقة برمجة (برنامج)، ودليل تعليمات مفصل مع رسوم توضيحية خطوة بخطوة، وكابلات أساسية (طولها 2 متر)، وكابلات محول مصممة خصيصًا لموصلات مضخة محددة. من خلال الإعداد المباشر، تكون مجموعة برمجة واحدة على الأقل ضرورية للوظائف، مما يجعل ERT45R أداة أساسية للمحترفين الذين يسعون إلى تعزيز قدرات الاختبار الخاصة بهم مع ضمان المرونة والكفاءة في بيئة عملهم.

باعتباره أحد المكونات الرئيسية لطريقة اختبار ERT45R، يتميز مقياس التدفق FL400/A بقدرات قياس مزدوجة، لمراقبة معدل التدفق إلى سكة الضغط العالي وتدفق العودة بشكل بديل.

HYDRAULIC CONNECTION KIT FOR BOSCH CP1/CP3/CP1H CR PUMPS. Items included:
Connection cables pumps > flow-meter
Cable for feeding pumps
Set of high pressure pipes

HYDRAULIC CONNECTION KIT FOR DELPHI DFP1/DFP2 CR PUMPS:
Connection cables pumps > flow-meter
Set of high pressure pipes

HYDRAULIC CONNECTION KIT FOR SIEMENS CR PUMPS. ITEMS INCLUDED:
Connection cable pumps > flow-meter
Cable for feeding pumps
Set of high pressure pipes
ZME valve holder

HYDRAULIC CONNECTION KIT FOR BOSCH CP4 CR PUMPS. Items included:
Cable for the return of the pump
Cable for feeding pump
Set of high pressure pipes

Set of hydraulic connections for CATERPILLAR C6.6 pumps

Hydraulic connections between the CAT C6.6 pump and the external lube 8217

Set of tools for the installation of the test bench for industrial pumps: C/rail DENSO HP0 NE SENSOR flanged pump (094000-0342) and BOSCH C/rail CP2 pumps.
Universal Test Bench crandle
Sensor holder
Coupling with reference notch cone 30
Universal mounting flange complete with O-ring

Set of tools for the installation of the test bench for C/rail pumpsDENSO HP0 G Sensor (094000-480) and NE 2 Sensor (094000-0240):
Pair of supports H=75 mm with adapter plate
Adapters plate for RPM sensor
Coupling reference notch cone 25

Completes the 81.01.1A01 phasing system for Denso V3/V4 pumps. Includes pump-side coupling components, Ø50 mm mounting flange and fittings for transfer-pressure measurement on V3 and V4 pumps.

Completes the 81.01.1A01 phasing system for Denso ECD-V5 pumps. Includes pump-side coupling components, Ø50 mm mounting flange and fittings for transfer-pressure measurement.

Lubrification connections for CP2 pumps > lube