跳至内容

ECOMMERCE


Hand Tools

Marbed's Book

  • Since 2011, the Marbed's Book has been organized into three color-coded sections: 
    1. green: test bench equipment, 
    2. red: tools for pumps, 
    3. blue: tools for injectors.

  • Subcategories enable you to progressively refine your search for specific products.

 

By-pass kit
Return by-pass set on CP2 / HP0 pumps
86.00 € 0 EUR
Test kit
transfer pressure test kit with 16 BAR pressure gauge (pressure gauge not included)
44.00 € 0 EUR
Staffe di fissaggio
Pair of mounting bracket for the easy disassemble and reassemble of HP0 pumps. The bracket has to be installed on the swivel vice 9260.
107.00 € 0 EUR
360.00 € 0 EUR
Swivel fitting
High pressure swivel fitting Male 14x1,5 - Female 12x1,5
90.00 € 0 EUR
Swivel fitting
High pressure swivel fitting Male 14x1,5 - Female 14x1,5
90.00 € 0 EUR
Flange
Warrants the centered clamping of the pumps having 50 mm hub diameter, on any test bench. The flange requires 9680-A universal cradle or similar.
122.00 € 0 EUR
186.00 € 0 EUR
Solution to mount and drive Caterpillar 3406 pumps on hartridge AVM-PC test benches.

1 Cradle
1 Flange for lubrication system
1 Coupling
1 Lubrication inlet
1 Forward bracket
1 Lateral bracket
1 Back bracket
2,986.00 € 0 EUR
50.00 € 0 EUR
Set of 3 adapters to test the nozzle of Bosch EUI (Volkswagen / Audi)
Similar to Bosch genuine 1 683 355 057 + 1 683 355 056 + 1 681 398 033
340.00 € 0 EUR
Mounting/driving set for CP3.4 (MAN), CP2 and HP0 pumps
Ready for external lubrication by oil.
478.00 € 0 EUR
68.00 € 0 EUR
20 吨手动压力机,用于冷成型钢管端部,采用共轨和传统注射方式
9376-D 压力机专为与我们的特定成型套件(需单独购买)配合使用而设计,使您能够处理不同类型和尺寸的管道。 无论您要处理传统喷射管还是共轨喷射管,都有兼容的成型套件可用。
3,235.00 € 0 EUR
9376-D 压力机上的成型套件,适用于 6mm 外径钢管(传统注射)。
9376-DP6 成型套件配備了一個連接到壓桿的成型頭、兩個錐形半殼(在成型操作過程中用作夾子以固定管道)以及一個量規,用於確定鎖定管道的精確尺寸。管,使零件自由變形。
548.00 € 0 EUR
9376-D 压力机上的成型套件,适用于 8 毫米外径钢管。
9376-DP8 成型套件配备了一个连接到压杆的成型头、两个圆锥形半壳(在成型操作过程中用作夹具来固定管道)以及一个测量仪,用于确定锁定管道的精确尺寸。 管,使零件自由变形。
564.00 € 0 EUR
9376-D 压力机上的成型套件,用于 6mm 外径钢管(共轨注射)。
9376-DP6CR 成型套件配备了用于共轨应用的特定成型头(用于连接到压杆)、两个圆锥形半壳(在成型操作过程中用作夹具以固定管道)以及一个测量仪,用于确定 锁定管道的确切位置,使零件不变形。
请注意,如果没有 9376-D 压力机,成型套件的实用性将受到限制。
580.00 € 0 EUR