Ir al contenido

ECOMMERCE


  1. Productos
  2. Libro de marbed
  3. Accesorios de banco de pruebas (1.)

Accesorios de banco de pruebas (1.)

EUR (ecommerce)
Ordenar por: Destacado

Accesorios de banco de pruebas (1.)

25 mm conical coupling
25 mm conical coupling to drive diesel pumps on any test bench. Length 100, teeth 12 mm
The puller 9463 is recommended to unplug the shaft.
138,00 € 0 EUR
Test bench coupling
Motoring coupling 100 length, cone diam 25, teeth mm 10 . Similar to Bh 1 686 430 030
100,00 € 0 EUR
Conical coupling
25 mm conical coupling to drive diesel pumps on any test bench. Length 58, teeth 12 mm
The coupling is equipped with an internal nut for locking and pulling out the shaft.
Similar to Bh 1 686 430 026 - Bh1 686 430 030
128,00 € 0 EUR
Motoring coupling
Motoring coupling 70 length, cone diam. 25, teeth mm 10
112,00 € 0 EUR
Marbed 9578-B Coupling System Half - Professional Steel Tool for Diesel Pump Testing
Experience the reliability of the Marbed 9578-B, a robust steel coupling half designed to drive diesel pumps on test benches. Compatible with PE..A, PE..B, P7, PE..MW..S1000, and Bosch reference part 1 686 430 024, it features a 27 mm hex nut for quick removal and versatile application.
112,00 € 0 EUR
Motoring coupling
Motoring coupling 58 lenght - cone ø30. Teeth 12 mm
118,00 € 0 EUR
Acoplamiento de banco de pruebas
The Marbed 9809-BC is a steel coupling half built to drive diesel pumps on advanced test benches. Designed for conical shafts (35 mm nominal diameter), it’s compatible with PE..P..S7000 (RP 25) pumps and Bosch reference part 1 686 430 038. Featuring an internally threaded M14x1.5 hex nut, it ensures effortless pump removal.
110,00 € 0 EUR
Motoring coupling without back plate
Cushioned motoring couple 4008/1 ISO normative for Bosch test beds without back plate
348,00 € 0 EUR
Complete test injector
Complete test injector similar to 1 688 901 115 (ISO 14681) type IX - opening pressure 250 BAR - orifice plate ø 0,4 mm
390,00 € 0 EUR
Portainiettore completo (ISO 14681) tipo VIII - tar. 207 BAR
314,00 € 0 EUR
Portainiettore completo (ISO 14681) tipo VIII - tar. 172 BAR
ISO test injector 1 688 901 112 (ISO 14681) type VIII - opening press. 172 BAR
314,00 € 0 EUR
Needle valve
Needle valve for ISO test injector type IV (0 681 443 014)
56,00 € 0 EUR
Portainiettore completo (ISO 7440) tipo IX - tar. 250 BAR - past.ø0.5 mm
390,00 € 0 EUR
Acoplamiento
Acoplamiento banco prueba longitud 85, cono ø35, profundidad del cono 40 mm, dientes 12 mm, para bombas P7100/7800 - P8500 BH (similar BH ref. 1686430040)
160,00 € 0 EUR
Semiacoplamiento cónico para eje nominal de 30 mm.
Longitud 85 mm, dientes de 12 mm.
Similar a la referencia de Bosch 1686430034.
138,00 € 0 EUR
Needle valve
91,00 € 0 EUR
Inyector de prueba
Complete test injector similar to 1 688 901 116 (ISO 14681) type IX - opening pressure 207 BAR - orifice plate ø 0,5 mm
390,00 € 0 EUR
Polverizzatore per tipo VIII (1 688 901 988)
67,00 € 0 EUR
Complete Test Injector (ISO 14681) type VIII - 147 BAR
284,00 € 0 EUR
High pressure test pipes for test bench (unbent), covered by rubber
Specifications:
- external diameter: 8 mm
- internal diameter: 3 mm
- thickness: 2,5 mm
- length: 1000 mm
- nuts: M14x1,5 mm - M14x1,5 mm
Similar to Bosch 1 680 750 075, Hartridge AHP124
78,00 € 0 EUR