27 mm 12-side socket wrench 1/2" drive for the solenoid retaining nut.
Similaro to Bosch 0 986 613 185.

Polishing and emery paste - grain 400

Polishing and emery paste - grain 600

Toolset for the manual grinding and lapping of the ball seat on Bosch CRI and CRIN valves.

Motoring reamer consisting of three milling cutters: plane milling cutter for nozzle holders seats Mercedes; coned milling cutter for nozzle holders Fiat Daily Ducato and plane milling cutter with large guide for Ford Transit nozzle holders seats.
Patented

High accuracy electronic tool to test and trig the electromagnetic actuator of Bosch CRI and CRIN injectors and automatically relief the ball lift for the 3rd stage repair.

Assortment of 850 calibrating shims for Bosch CRI and CRIN injectors, with 5 useful tools.
List of contents:
8210-T1, ball handling tool
8210-T2, antimagnetic pair of pliers
8210-T3, ring inserter
8210-T4, valve interter
8210-T5, ring extractor
8210-R04 from 1.20 to 1.66, every 0,02 mm (5 pcs each thickness)
8210-R05 from 1.20 to 1.66, every 0,02 mm (5 pcs each thickness)
8210-R06 from 1.20 to 1.66, every 0,02 mm (5 pcs each thickness)
8210-R07 from 1.20 to 1.66, every 0,02 mm (5 pcs each thickness)
8210-R13 from 1.14 to 1.25, every 0,01 mm (5 pcs each thickness)
8210-R28 from 8.40 to 8.51, every 0,01 mm (5 pcs each thickness)
8210-R29 from 8.40 to 8.51, every 0,01 mm (5 pcs each thickness)
8210-R34 from 0.99 to 1.10, every 0,01 mm (5 pcs each thickness)
8210-R35 from 0.99 to 1.10, every 0,01 mm (5 pcs each thickness)
8210-R41 from 1.19 to 1.10, every 1.30 mm (5 pcs each thickness)

Assortment of 850 calibrating shims for Bosch CRI and CRIN injectors.
List of contents:
8210-R04 from 1.20 to 1.66, every 0,02 mm (5 pcs each thickness)
8210-R05 from 1.20 to 1.66, every 0,02 mm (5 pcs each thickness)
8210-R06 from 1.20 to 1.66, every 0,02 mm (5 pcs each thickness)
8210-R07 from 1.20 to 1.66, every 0,02 mm (5 pcs each thickness)
8210-R13 from 1.14 to 1.25, every 0,01 mm (5 pcs each thickness)
8210-R28 from 8.40 to 8.51, every 0,01 mm (5 pcs each thickness)
8210-R29 from 8.40 to 8.51, every 0,01 mm (5 pcs each thickness)
8210-R34 from 0.99 to 1.10, every 0,01 mm (5 pcs each thickness)
8210-R35 from 0.99 to 1.10, every 0,01 mm (5 pcs each thickness)
8210-R41 from 1.19 to 1.10, every 0.01 mm (5 pcs each thickness)

Compact pneumatic press for restoring the sealing seat of the ball valve in Bosch CRI and CRIN common rail injectors.
The operation is not a grinding process: a geometrically accurate hardened-metal ball is pressed against the conical seat to restore the sealing surface without removing material.
Supplied with a set of 10 hardened-metal balls. Each ball can be used for up to 100 pressing operations and must not be confused with the ball normally used as an injector spare part.

Holder for millesimal gauge with 70 mm diameter round top. Made in hardened, ground and lapped steel.

Assortment of 450 copper washers for the correct positionning the common-rail nozzle holders into the combustion chamber

Sliding hammer puller for copper washers

Anti-magnetic, stainless steel, high precision tweezers reccomended for the positioning of spare parts on common rail injectors