In memory of Roberto Gandini, founder and Chairman of InjectionPower. Read more
Skip to Content


Find tools and test equipment for your diesel workshop

See prices after sign-in. Not sure? Download the catalog or request a quote.

Инструменты для насосов Denso HP0 Common Rail (236)

Инструменты для насосов системы Common Rail Denso HP0

  • Насосы высокого давления Denso HP0 с системой Common Rail широко используются в дизельных двигателях Toyota, Isuzu, Hino, Mitsubishi, Nissan, Komatsu, а также во многих промышленных и сельскохозяйственных автомобилях.
  • Компания InjectionPower поставляет профессиональные сервисные инструменты, измерительное оборудование и принадлежности для мастерских, специально разработанные для ремонта, разборки и обслуживания насосов Denso HP0 с системой Common Rail.
  • Ознакомьтесь с представленными ниже инструментами, чтобы найти подходящее оборудование для ремонта, технического обслуживания и профессиональной работы в мастерской с насосами Denso HP0.

By-pass kit
Return by-pass set on CP2 / HP0 pumps
Conical coupling
25 mm conical coupling to drive diesel pumps on any test bench. Length 58, teeth 12 mm
The coupling is equipped with internal nut for locking and pulling out the shaft.
Similar to Bh 1 686 430 026 - Bh1 686 430 030
Kit controllo depressione con manovuotometro.
This device allows to monitor the pump body pressure (5 BAR).
It is also equipped with ball valve, to measure the negative pressure generated by the pump.
Caution: Not all test benches are able to supply the amount of flow required by the comon rail pumps. Therefore, it is crucial to monitor that, during the test, the pump does not go into cavitation.
Test kit
transfer pressure test kit with 16 BAR pressure gauge (pressure gauge not included)
Крепежные стержни
Pair of mounting bracket for the easy disassemble and reassemble of HP0 pumps. The bracket has to be installed on the swivel vice 9260.
Монтажный и приводной комплект для насосов CR CP3.4 (MAN) / CP2 / HP0 – Внешняя масляная смазка
Полный комплект для монтажа и привода насосов Common Rail CP3.4 (MAN), CP2 и HP0. Соответствует спецификациям Bosch (Ø 107 мм, диаметр окружности болтов Ø 130 мм), что обеспечивает идеальную центровку и безопасную работу с внешней масляной смазкой во время испытательных стендов.