콘텐츠로 건너뛰기

ECOMMERCE


EUR (ecommerce)
정렬 기준: 추천 상품
Set fissaggio e trascinamento pompe CP2 (cono 30 + flangia fissaggio + flangia lubrificazione)
450.00 € 0 EUR
Lube
Additional external LUBE.
*** Required if the test bench in use is not equipped with a lubricating system.
5,190.00 € 0 EUR
Centralina di lubrificazione per pompe CP2
5,599.00 € 0 EUR
Centralina di lubrificazione per pompe HP0
5,599.00 € 0 EUR
Complementary set of fittings for pump unit 8217 on DENSO HP0 pumps (straight for G 2NE) (2x90° for NE)
186.00 € 0 EUR
Set complementare di raccordi per centralina 8217 su pompe BOSCH CP2
170.00 € 0 EUR
Kit controllo depressione con manovuotometro.
This device allows to monitor the pump body pressure (5 BAR).
It is also equipped with ball valve, to measure the negative pressure generated by the pump.
Caution: Not all test benches are able to supply the amount of flow required by the comon rail pumps. Therefore, it is crucial to monitor that, during the test, the pump does not go into cavitation.
470.00 € 0 EUR
By-pass kit
Return by-pass set on CP2 / HP0 pumps
86.00 € 0 EUR
Test kit
transfer pressure test kit with 16 BAR pressure gauge (pressure gauge not included)
44.00 € 0 EUR
Toolset for the primer suction control as well as the valve seal control, on Denso HP0 pumps.
210.00 € 0 EUR
Staffe di fissaggio
Pair of mounting bracket for the easy disassemble and reassemble of HP0 pumps. The bracket has to be installed on the swivel vice 9260.
107.00 € 0 EUR
Coppia di staffe per HP0
360.00 € 0 EUR
Clamping system
System to clamp injectors by plates.
129.00 € 0 EUR
Swivel fitting
High pressure swivel fitting Male 14x1,5 - Female 12x1,5
90.00 € 0 EUR
Swivel fitting
High pressure swivel fitting Male 14x1,5 - Female 14x1,5
90.00 € 0 EUR
Alesatore guidato con fresa conica (ns. cod. 8044), per sedi iniettori common rail su 16 valvole Fiat. Fornito in cassetta di legno.
Not Available For Sale 0 EUR
Flange
Warrants the centered clamping of the pumps having 50 mm hub diameter, on any test bench. The flange requires 9680-A universal cradle or similar.
122.00 € 0 EUR
Filtro magnetico
186.00 € 0 EUR
Solution to mount and drive Caterpillar 3406 pumps on hartridge AVM-PC test benches.

1 Cradle
1 Flange for lubrication system
1 Coupling
1 Lubrication inlet
1 Forward bracket
1 Lateral bracket
1 Back bracket
2,986.00 € 0 EUR
Decimal comparator without spring
Decimal comparator 30 mm stroke for rack travel measurement, without spring
115.00 € 0 EUR