콘텐츠로 건너뛰기

Explore Premium Tools and Solutions for Diesel Pump and Injector Repairs

SHOP BY CATEGORY: HAND TOOLS, TEST EQUIPMENT, AND MORE (E-COMMERCE)


  1. 품목
  2. Hand Tools
  3. Tools for diesel pumps (2.)

Tools for diesel pumps (2.)

EUR (ecommerce)
정렬 기준: 추천 상품

Tools for diesel pumps (2.)

Marbed 9422-U Flat Bracket for Centering Diesel Pumps on Test Benches
The Marbed 9422-U brings precision and adaptability to your diesel pump testing needs, with compatibility ranging from Bosch-standard models to Denso HP0 pumps. Built for professionals.
Flexible pipe
Flexible High pressure line L=600 mm. - M12x1,5 - M12x1,5
Tappet holder for Bosch CP2 pumps. Similar to 0 986 612 858 Zexel 157931-9400
Transfer pressure Kit
Kit to determine if the ZME valve can be retained, instead of installing a new one, on CP4 pumps.
Splined coupling to drive CP3.4 (MAN) pumps on any test bench.Similar to 1 685 702 092
Splined coupling to drive CP3.4 (MAN) pumps on any test bench.
Similar to 1 685 702 092
Marbed 9408-A 스플라인 커플링 어댑터 - DPA 기어용 구동 커플링
DPA 기어용 드라이브 커플링으로도 알려진 Marbed 9408-A 스플라인 커플링 어댑터로 테스트 벤치에서 안전하고 정밀하며 원활한 성능을 확보하세요. DPA 디젤 연료 분사 펌프용으로 특별히 설계된 이 암 스플라인 커플링은 테스트 중 엔진 상태를 시뮬레이션할 때 탁월한 신뢰성과 정확성을 제공합니다. 고급 소재로 제작되어 혹독한 사용 환경에서도 뛰어난 내구성과 뛰어난 성능을 보장하므로 디젤 연료 분사 전문가에게 완벽한 솔루션입니다.
Bussola 1/2 per Torx Femmina E8
Cacciavite per Torx Femmina E8
Bussola 1/2 per Torx 50
Torx bit
Similar to 0 986 613 145
Flexible pipe
Flexible pipe ( cr 2500BAR) to connect the high pressure delivery from the pump outlet to the rail. Nuts 14x15 / 14x1,5. Similar to 1 680 712 324
Estrattore per CP1
Extraction tool for the cap on the rod-type filter on common rail high-pressure pump CP1H with gear pump.
Similar to 0 986 613 165
Puller
Extractor tool for the filter cap on CP1H common rail high pressure pumps equipped with gear pump.
Similar to Bosch 0 986 613 162.
Set fissaggio e trascinamento pompe CP2 (cono 30 + flangia fissaggio + flangia lubrificazione)
Centralina di lubrificazione per pompe HP0
Kit controllo depressione con manovuotometro.
This device allows to monitor the pump body pressure (5 BAR).
It is also equipped with ball valve, to measure the negative pressure generated by the pump.
Caution: Not all test benches are able to supply the amount of flow required by the comon rail pumps. Therefore, it is crucial to monitor that, during the test, the pump does not go into cavitation.
By-pass kit
Return by-pass set on CP2 / HP0 pumps
Test kit
transfer pressure test kit with 16 BAR pressure gauge (pressure gauge not included)
Toolset for the primer suction control as well as the valve seal control, on Denso HP0 pumps.
Staffe di fissaggio
Pair of mounting bracket for the easy disassemble and reassemble of HP0 pumps. The bracket has to be installed on the swivel vice 9260.
Coppia di staffe per HP0