Skip ke Konten

ECOMMERCE


EUR (ecommerce)
Sortir Berdasarkan: Featured
Flexible pipe
Flexible pipe ( cr 2500BAR) to connect the high pressure delivery from the pump outlet to the rail. Nuts 14x15 / 14x1,5. Similar to 1 680 712 324
482,00 € 0 EUR
Kit controllo depressione con manovuotometro.
This device allows to monitor the pump body pressure (5 BAR).
It is also equipped with ball valve, to measure the negative pressure generated by the pump.
Caution: Not all test benches are able to supply the amount of flow required by the comon rail pumps. Therefore, it is crucial to monitor that, during the test, the pump does not go into cavitation.
470,00 € 0 EUR
Toolset for the primer suction control as well as the valve seal control, on Denso HP0 pumps.
210,00 € 0 EUR
Staffe di fissaggio
Pair of mounting bracket for the easy disassemble and reassemble of HP0 pumps. The bracket has to be installed on the swivel vice 9260.
107,00 € 0 EUR
Swivel fitting
High pressure swivel fitting Male 14x1,5 - Female 12x1,5
90,00 € 0 EUR
Swivel fitting
High pressure swivel fitting Male 14x1,5 - Female 14x1,5
90,00 € 0 EUR
Flange
Warrants the centered clamping of the pumps having 50 mm hub diameter, on any test bench. The flange requires 9680-A universal cradle or similar.
122,00 € 0 EUR
Solution to mount and drive Caterpillar 3406 pumps on hartridge AVM-PC test benches.

1 Cradle
1 Flange for lubrication system
1 Coupling
1 Lubrication inlet
1 Forward bracket
1 Lateral bracket
1 Back bracket
2.986,00 € 0 EUR
Decimal comparator without spring
Decimal comparator 30 mm stroke for rack travel measurement, without spring
115,00 € 0 EUR
Sostegno polverizzatori
50,00 € 0 EUR
8120 con chiave a T
68,00 € 0 EUR
Mesin press seberat 20 ton yang dioperasikan dengan tangan untuk membentuk ujung pipa baja secara dingin, baik dalam injeksi common-rail maupun konvensional
Mesin Press 9376-D dirancang untuk digunakan dengan kit pembentukan khusus kami (dapat dibeli terpisah), memungkinkan Anda bekerja dengan berbagai jenis dan ukuran pipa. Baik Anda menggunakan pipa injeksi tradisional atau pipa injeksi common rail, tersedia kit pembentuk yang kompatibel.
3.235,00 € 0 EUR
Paket mesin press dan Forming Kit untuk ujung pipa baja, baik dalam common rail maupun injeksi konvensional
Perangkat lengkap ini menggabungkan kekuatan Mesin Press 9376-D kami yang dioperasikan dengan tangan seberat 20 ton dengan tiga kit pembentuk serbaguna, memberikan Anda solusi terbaik untuk kebutuhan perbaikan pipa Anda.
Baik Anda menangani pipa injeksi tradisional atau common rail, paket ini memastikan Anda memiliki alat yang tepat.
Berat: kira-kira 42kg
Dimensi: cm 40x30x56 jam
4.854,00 € 0 EUR
Kit per HP0 da 9422 (versione universale)
120,00 € 0 EUR
Interface (adapter with rod and fitting for the pressure tests) for 9664-N on Bosch VE pumps
62,00 € 0 EUR
Kit per convertire un 9402-A in 8130
185,00 € 0 EUR
Flens pemasangan.
Flensa pemusatan untuk memasang pompa Bosch VP44 dan VR30 (memiliki diameter hub 68mm) pada bangku uji. Dudukan universal 9680-A atau serupa diperlukan
102,00 € 0 EUR
Cover
Replace lid for the serial lid on the prestroke magnet, with threaded hole for the measuring device ( BH 0 986 612 657)
94,00 € 0 EUR
Puller
Bush exctractor from the governor box. Similar to Bosch 0 986 619 250 (0 986 619 251) - KDAW 9995/14 (KDAW 9995/14 /1)
101,00 € 0 EUR
Kit inserter
Kit for exacting ball plux of BOSCH VE pump with LDA
98,00 € 0 EUR