Skip ke Konten

ECOMMERCE


Tappet lift
Tappet lift fork size A strenghtened
28,00 € 0 EUR
Nozzle holder tool for Opel Diesel 2000
Nozzle holder tool for Opel Diesel 2000
93,00 € 0 EUR
Reductions for degrees tester, 9 pieces
Nove riduzioni per prova gradi, 9 pezzi.
92,00 € 0 EUR
Tools box
Extended configuration of special holders, probes and comparator (in wooden case) for the phasing of the Bosch VE rotary pumps.
357,00 € 0 EUR
Provetta graduata
Technical specifications:
- capacity: 0-30 cc.
- external diameter: 17 mm
- length: 240 mm
59,00 € 0 EUR
Coupling
3 holes coupling for CAV DPS pumps, direct injection
88,00 € 0 EUR
Tappet lifter
Plate for PES..M 6 cyl. Complete with 6 tappet lifters. ( KDEP KDEP 1563/3)
84,00 € 0 EUR
Puller / inserter kit
Puller / connector kit for oil seal of the
accelerator shaft RQ governor
48,00 € 0 EUR
Timing disk bubble
Quadrant degree ring assembly
148,00 € 0 EUR
Clamp
Clamp with two rods (spare part)
34,00 € 0 EUR
High pressure test pipes for test bench (unbent)
Specifications:
- external diameter: 6 mm
- internal diameter: 1,75 mm
- thickness: 2,125 mm
- length: 450 mm
- nuts: M12x1,5 mm - M14x1,5 mm
Similar to Hartridge AHP133
26,00 € 0 EUR
Set of tools for the bearing bushes diam 20
The toolset includes the following:
- centering guide
- introduction mandrel
- ejection spindle
- manual reamer
Similar to the reference Bosch 1 688 010 124, 0 986 611 953, KDEP 1171
164,00 € 0 EUR
Tappet lifter
Eccentric tappet lifter for PE (S) .. MW..S1000 pumps. Cam lift 10 mm (BH 0 986 611 733, KDEP 1068)
98,00 € 0 EUR
Tappet lifter
Tappet holder to fix and holding tappets on inline injection pumps size MW, RW. Cam lift 8 mm.
Similar to 0 986 611 653, KDEP 1051.
98,00 € 0 EUR
9536/B Chiave di smontaggio del portainiettori strumentalizzato su Mercedes C.
Disassembly wrench of first instrumental injector holder equipped with sensor connected to the gearbox hexag mm.22 for Mercedes C
58,00 € 0 EUR
Key for ring nut
Wrench for lock pumping ring Caterpillar 955K etc.
78,00 € 0 EUR
Adjusting wrench
Spanner for the turbo control on DPS, DP200 pumps. ( réf. 7244-584)
56,00 € 0 EUR