Assortment of 850 calibrating shims for Bosch CRI and CRIN injectors, with 5 useful tools.
List of contents:
8210-T1, ball handling tool
8210-T2, antimagnetic pair of pliers
8210-T3, ring inserter
8210-T4, valve interter
8210-T5, ring extractor
8210-R04 from 1.20 to 1.66, every 0,02 mm (5 pcs each thickness)
8210-R05 from 1.20 to 1.66, every 0,02 mm (5 pcs each thickness)
8210-R06 from 1.20 to 1.66, every 0,02 mm (5 pcs each thickness)
8210-R07 from 1.20 to 1.66, every 0,02 mm (5 pcs each thickness)
8210-R13 from 1.14 to 1.25, every 0,01 mm (5 pcs each thickness)
8210-R28 from 8.40 to 8.51, every 0,01 mm (5 pcs each thickness)
8210-R29 from 8.40 to 8.51, every 0,01 mm (5 pcs each thickness)
8210-R34 from 0.99 to 1.10, every 0,01 mm (5 pcs each thickness)
8210-R35 from 0.99 to 1.10, every 0,01 mm (5 pcs each thickness)
8210-R41 from 1.19 to 1.10, every 1.30 mm (5 pcs each thickness)

Dukungan melingkar harus dipasang pada alas berputar (ref. 8132 atau 9260).
Sistem ini terdiri dari penyangga cincin melingkar, di mana braket (dapat dilepas) dengan proyeksi yang dapat disesuaikan dipasang, yang memungkinkan untuk menekan tappet. Dudukan melingkar memegang flensa bundar yang dapat dipertukarkan, yang dapat berputar 360 derajat dan dapat dikunci di posisi apa pun.
Flensa internal memungkinkan untuk memperbaiki pompa CP1, CP3, CP4, HP1, HP3, HP4, Delphi dan VDO.
Mirip dengan 0 986 612 794

Sebagai opsi tambahan, flensa opsional berikut juga tersedia:
- 8131, untuk pompa CP3.4
- 9402, untuk pompa mekanis A, M, VE, DPC

Torx bit
Similar to 0 986 613 145

Assortment of 850 calibrating shims for Bosch CRI and CRIN injectors.
List of contents:
8210-R04 from 1.20 to 1.66, every 0,02 mm (5 pcs each thickness)
8210-R05 from 1.20 to 1.66, every 0,02 mm (5 pcs each thickness)
8210-R06 from 1.20 to 1.66, every 0,02 mm (5 pcs each thickness)
8210-R07 from 1.20 to 1.66, every 0,02 mm (5 pcs each thickness)
8210-R13 from 1.14 to 1.25, every 0,01 mm (5 pcs each thickness)
8210-R28 from 8.40 to 8.51, every 0,01 mm (5 pcs each thickness)
8210-R29 from 8.40 to 8.51, every 0,01 mm (5 pcs each thickness)
8210-R34 from 0.99 to 1.10, every 0,01 mm (5 pcs each thickness)
8210-R35 from 0.99 to 1.10, every 0,01 mm (5 pcs each thickness)
8210-R41 from 1.19 to 1.10, every 0.01 mm (5 pcs each thickness)

Swivel vice for Common-rail pumps

System to clamp injectors by plates.

Tool to recover the tightness of the ball valve of CRI and CRIN common rail injectors.
It is not a grinding operation to remove hardened metal from the conical seat: the principal is to keep the treatment of the conical surface and compact its molecoles by a strong shot on a geometrically accurate sphere made of hard metal.
A set of 10 pcs of these balls is provided with the machine.
Each ball can be used for 100 shots and have not to be confused with the balls normally used as spare part.

Holder for millesimal gauge with 70 mm diameter round top. Made in hardened, ground and lapped steel.

Universal puller for 8099-AN, part of 8099-E. Similar to Bosch 0 986 612 782

Assortment of 450 copper washers for the correct positionning the common-rail nozzle holders into the combustion chamber