Skip to Content

ECOMMERCE


  1. Products
  2. प्रमुखता से दिखाना

प्रमुखता से दिखाना

Product highlighting

  • In a huge range of products, highlighting just some of them carries a significant responsibility. Nevertheless, the subcategories listed on the left offer diverse perspectives, aiming to inspire and enhance the search process. 

 

EUR (ecommerce)
Sort By: Featured

प्रमुखता से दिखाना

Universal basic cambox
Cambox universal base to house camshaftless pumps up to 4 cylinders on the test bench.
The cambox must be configured correctly (mounting plate, thickness - if required -, camshaft, control lever connection, sliding rod), depending on the type of pump to be tested.
647.00 € 0 EUR
पीईएस...ए पंप के लिए केंद्रित निकला हुआ किनारा
(BH ref. 1 685 720 017)
172.00 € 0 EUR
Chiave a bussola dentata_
Insert external diameter 6,3 mm.with inside hole diam.2,8 mm.on Stanadyne pumps.
18.00 € 0 EUR
Bit for the governor control cover screw on DP2100 pumps. Similar to 7244-438.
18.00 € 0 EUR
Estrattore iniettore/pompa UIS Unit Injector System su Lupo Volkswagen
1.00 € 0 EUR
Estrattore portainiettore common rail su Mercedes Classe A.
126.00 € 0 EUR
Magnet for rack / dial gauge rod
34.00 € 0 EUR
Puller
Self-threading puller for oil seal on diam.20 shaft ( 0 986 611 821 - Kdep 1114)
48.00 € 0 EUR
Puller
Nozzle holder sliding hammer puller, with joint head
82.00 € 0 EUR
Estrattore su ALFA 156
76.00 € 0 EUR
Puller
Sliding hammer with adapter to extract Bosch CRIN injectors on Iveco Eurocargo
104.00 € 0 EUR
Interface for CP3 pumps
Interchangeable mounting plate for CP3 pumps, to be used in conjuction with the operating flange 8130.
147.00 € 0 EUR
Comparator holder M10x1 with pair of probes.
Similar to 0 986 612 480, KDEP 1880.
25.00 € 0 EUR
Comparator bearing
Comparator bearing to survey the rod share with connections for BOSCH P, P7100,8500,MW BOSCH pumps
142.00 € 0 EUR
Brush
Steel conical brush
13.00 € 0 EUR
Retaining wrench for turning and supporting the camshaft. Similar to 0 986 611 211 (KDEP 2906).
55.00 € 0 EUR
Pre-stroke measuring device, to adjust the delivery start and measure the tappet clearance on the TDC, in the PE (S) .. P, with M24 x 1.5 connection. Similar to BH 1688130085 - 1688130112 -1 688 040 071
118.00 € 0 EUR
Dial gauge holder for delivery start measurement on A, B pumps
Dial gauge holder with a spill point pipe and an extended rod with returning action.
Application: delivery start measurement on A, B, BV and line BOSCH pumps. Threads: M12x1,5 and M14x1,5
96.00 € 0 EUR
Universal comparator support with rocker arm and return spring
Universal bracket with rocker arm and return spring, for holding the comparator during the measuring of the rack travel on inline pumps.
188.00 € 0 EUR
9117 Supporto comparatore pompe PE..P per rilevare la quota di inizio mandata
107.00 € 0 EUR