Quick clamping system for common rail injectors Cummins on Scania XPI on DIT31 test bench

Reinforced quick release connection nozzle holder side

Reinforced quick release connection dumper holder side

Rilsan flex.hose with reinforced quick connections for high pressure complete with male/female fittings 20x1,5

Rislan flex.hose with quick connections on male/female fitting 20x1,5

The rubber coating strengthens the tube which therefore vibrates less and produces less noise, extending its life. Specifications:
- external diameter: 6 mm
- internal diameter: 2 mm
- thickness: 2 mm
- length: 450 mm
- nuts: M12x1,5 mm - M14x1,5 mm
Similar to Bosch reference 1 680 750 073, Hartridge AHP120

Set of hydraulic connections for BOSCH CP2 pumps. Items included:
Holder adapter for overflow valve and pipe connections for transfer pressure without manometer.
Cable for camshaft pulse control of pumps BOSCH CP2
Test injector ref. 1 688 901 105
High pressure pipes for BOSCH CP2 application
Set of pipes of connections for BOSCH CP2 application

Set of hydraulic connections for DENSO HP0 pumps. Items included:
Holder adapter for overflow valve and pipe connections for transfer pressure without manometer.
Cap for PCV valve
High pressure pipes for DENSO HP0 application
Set of pipes of connections for DENSO HP0 application

High pressure test pipes for test bench (unbent), covered by rubber
Specifications:
- external diameter: 6 mm
- internal diameter: 2 mm
- thickness: 2 mm
- length: 600 mm
- nuts: M14x1,5 mm - M12x1,5 mm
Similar to Bosch reference 1 680 750 014, Hartridge AHP117

TC38 - Injector triggering unit for common-rail injectors.
This unit has been developed as a module, to be used in two main applications:
- in conjunction with the DIT31 test bench, to test any common rail injector
- in conjunction with the ERT45R simulator, to make running the complete common rail system (pump+rail+injectors) on any test bench.
Main features:
- Triggering command for electromagnetic actuators (always provided)
- Triggering command for piezoelectric actuators (provided as optional, by the CRP extension)
- Ready to multiple injection technology (pre-injection, main injection, recovery injection)
- no manual adjustment is required, in fact all the parameters necessary to generate the appropriate pulse(s) are memorized in special smartcards (triggering cards)
- Basic triggering cards are provided to acquire the test parameters of any brand new injector. These figures can be used to compare the test results of injectors having the same part number.
- In addition to the basic triggering cards, specific triggering cards (complete with ready-to-use test data) are available for the some of Bosch, Delphi, and Denso injectors.
- when used with ERT45R simulator, the RPM input is available for the dynamic triggering till 4 injectors, automatically in specific way at different speeds. Multiples of additional 4 injectors can be added, as option.
- 24 months warranty. User's and servicing manual.

TP03 is a digital manometer equipped with memory, to display the peak pressure as well as the effective pressure.
Furthermore, TP03 calculates the leakage time, that is the necessary time to pass from an higer level of pressure to a lower one (both limits are programmable).
For these features TP03 is the most appropriate electronic instrument to be used in conjunction with an injector tester, to automatically relief the Nozzle Onpening Pressure (NOP) of the conventional diesel fuel injectors, as well as NOP1 NOP2 of the 2-stage (double spring) injectors.
By a T connection (M14x1,5), the pressure sensor is insterted into the hydraulic circuit (on the pop tester, between the outlet from the pump and the injector). TP03 is an add-on to any hand operated injector tester and doesn't enahce the hydraulic performances of the injector tester.
When connected directly on vehicle, the TP03 can also be used to test the pressure and detect leakages in Common-rail systems.
24 months warranty.

Specifications:
- external diameter: 6 mm
- internal diameter: 2 mm
- thickness: 2 mm
- length: 600 mm
- nuts: M14x1,5 mm - M14x1,5 mm
Similar to Bosch reference 1 680 750 008, Hartridge AHP119, Denso 95091-10280

High pressure test pipes for test bench (unbent) , covered by rubber
Specifications:
- external diameter: 6 mm
- internal diameter: 2 mm
- thickness: 2 mm
- length: 840 mm
- nuts: M12x1,5 mm - M14x1,5 mm
Similar to Bosch reference 1 680 750 017, Hartridge AHP118

Sensor for the test bench shaft for application Caterpillar C6.6

Cable for Denso common rail injectors, 4 poles on Toyota

This service is a comprehensive opportunity aimed at enhancing the technical skills of diesel injection Specialists.
This one-day course, spanning 8 working hours, will be conducted in English at the DETEQ headquarters in Italy, accommodating a maximum of 2 participants.
Throughout the course, participants will engage with experienced DETEQ technicians who will cover essential topics including the performance features of the products, installation challenges, proper usage methods, and maintenance practices. The hands-on practicality of this training is crucial; participants will receive step-by-step guidance from our technical personnel during practical exercises. At the end of the session, each attendee will be awarded a certificate, confirming their successful participation and knowledge gained during the training. This initiative not only improves operational competency but also empowers technicians to maximize the efficiency and reliability of their diesel diagnostic systems.

Training course for the use of DIT31&TC38 Injector tester for the testing of traditional, double spring and common rail injectors ( equipped with electromagnetic and piezoelectric actuator ).

Service features:

- The training course will take place in Italy at DETEQ headquarter
- Duration of 1 day ( 8 working hours )
- Maximum for 2 participants
- Is held in English Language
- The standard training is destined to participants already operators of diesel systems.
- Is excluded the technical instruction on the technology of the components which are object of the machine operativity. This kind of service can be provided only upon agreement with DETEQ.
-At the end of the training will be issued a frequency profit Certificate

The course includes the training provided by DETEQ Technicians, for:
- Performance features of the products
- Details and installation problems
- Methods of use
- Maintenance
- Practice with the help of DETEQ technicians. The participants will be first instructed and then followed step by step by our technical personnel for practical exercises.

Training service for the use of the ERT45R Simulator with the kits for the test of BOSCH VP44/VR30 pumps.

Service features:
- The training course will take place in Italy at DETEQ headquarter
- Duration of 1 day ( 8 working hours )
- Maximum for 2 participants
- Is held in English Language
- The standard training is destined to participants already operators of diesel systems.
- Is excluded the technical instruction on the technology of the components which are object of the machine operativity. This kind of service can be provided only upon agreement with DETEQ.
-At the end of the training will be issued a frequency profit Certificate

The course includes the training provided by DETEQ Technicians, for:
- Performance features of the products
- Details and installation problems
- Methods of use
- Maintenance
- Practice with the help of DETEQ technicians. The participants will be first instructed and then followed step by step by our technical personnel for practical exercises.

Training for the use of the ERT45R simulator with the programming kit for testing the Bosch CP1/CP3/CP4 common rail pumps.

Service features:
- The training course will take place in Italy at the DETEQ site
- Duration of 1 day
- Maximum for 2 participants
- It is taught in English
- Standard training is intended for participants who are already operators of diesel systems.
- Technical instructions on the technology of the components that are the object of the operation of the machine are excluded. This type of service can only be provided with DETEQ.
- At the end of the training a certificate of attendance will be issued

The course includes training provided by DETEQ technicians, for:
- Performance characteristics of the products
- Details and installation problems
- Methods of use
- Maintenance
- Practice with the help of DETEQ technicians. Participants will first be instructed and followed by our technical staff for practical exercises.