Bracket for assembly / disassembly of common rail pumps, on the workbench.

The circular support must be installed on revolving bases (ref. 8132 or 9260).
The system consists of a circular ring support, on which the (removable) bracket with adjustable projection is mounted, which allows to press the tappets. The circular holder holds an interchangeable round flange, which can rotate 360 degrees and can be locked in any position.
The internal flange allows to fix CP1, CP3, CP4, HP1, HP3, HP4, Delphi and VDO pumps.
Similar to 0 986 612 794

As an additional option, the following optional flanges are also available:
- 8131, for CP3.4 pumps
- 9402, for mechanical pumps A, M, VE, DPC

9 mm Oldham drive coupling for CP3 (FIAT) ans Siemens pumps on any test bench.
Similar to 1 685 702 090

Interface to be assembled on the flange 8130 and 9478-CR for fixing Delphi cr pumps as R9042A040A or R9042A014A and similars.

Warrants the centered clamping of the pumps having 50 mm hub diameter, on any test bench. The flange requires 9680-A universal cradle or similar.

Flexible High pressure line L=600 mm. - M12x1,5 - M12x1,5

This device allows to monitor the pump body pressure (5 BAR).
It is also equipped with ball valve, to measure the negative pressure generated by the pump.
Caution: Not all test benches are able to supply the amount of flow required by the comon rail pumps. Therefore, it is crucial to monitor that, during the test, the pump does not go into cavitation.

मार्बेड 8155-E फ्लैंज किसी भी परीक्षण बेंच पर अधिकांश कॉमन रेल पंपों (बॉश CP1, CP3, CP4, डेल्फी, डेंसो, VDO) के लिए केंद्रित क्लैम्पिंग की गारंटी देता है। यह चार रिडक्शन रिंग्स (Ø 50, 60, 68, 80 मिमी) से सुसज्जित है और CP1K पंपों के साथ संगत है। उचित माउंटिंग के लिए मार्बेड 9680-A यूनिवर्सल क्रैडल या समान सपोर्ट की आवश्यकता होती है।

Swivel vice for Common-rail pumps