Tool box for MW BOSCH (type Mercedes) consisting of 18 pieces

27 mm 12-side socket wrench 1/2" drive for the solenoid retaining nut.
Similaro to Bosch 0 986 613 185.

25 mm conical coupling to drive diesel pumps on any test bench. Length 100, teeth 12 mm
The puller 9463 is recommended to unplug the shaft.

27 mm hexagon socket wrench 1/2" drive for the solenoid retaining nut of Industrial Denso and Siemens Injectors

29 mm hexagon socket wrench 1/2" drive for the solenoid retaining nut.
Similar to 0 986 613 633

القطر الخارجي 5.3 ملم ، القطر الداخلي 2.5 ملم

القطر الخارجي 5.3 ملم ، القطر الداخلي 3.5 ملم

Toolset for the manual grinding and lapping of the ball seat on Bosch CRI and CRIN valves.

Dynamometrical wrench 30-140 NM, 20-100 LBFFT

Toothed nut adapter on unit pump VW/AUDI

Drive converter from rectangular 14 x 18 mm connection to 1/2" square

Allen wrench, 10 mm hexagon drive to dismount the high-pressure sealing ring of common-rail injectors - 7,5 mm hole

Allen wrench, 10 mm hexagon drive to dismount the high-pressure sealing ring of common-rail injectors - 6,5 mm hole

High accuracy electronic tool to test and trig the electromagnetic actuator of Bosch CRI and CRIN injectors and automatically relief the ball lift for the 3rd stage repair.

Assortment of 850 calibrating shims for Bosch CRI and CRIN injectors, with 5 useful tools.
List of contents:
8210-T1, ball handling tool
8210-T2, antimagnetic pair of pliers
8210-T3, ring inserter
8210-T4, valve interter
8210-T5, ring extractor
8210-R04 from 1.20 to 1.66, every 0,02 mm (5 pcs each thickness)
8210-R05 from 1.20 to 1.66, every 0,02 mm (5 pcs each thickness)
8210-R06 from 1.20 to 1.66, every 0,02 mm (5 pcs each thickness)
8210-R07 from 1.20 to 1.66, every 0,02 mm (5 pcs each thickness)
8210-R13 from 1.14 to 1.25, every 0,01 mm (5 pcs each thickness)
8210-R28 from 8.40 to 8.51, every 0,01 mm (5 pcs each thickness)
8210-R29 from 8.40 to 8.51, every 0,01 mm (5 pcs each thickness)
8210-R34 from 0.99 to 1.10, every 0,01 mm (5 pcs each thickness)
8210-R35 from 0.99 to 1.10, every 0,01 mm (5 pcs each thickness)
8210-R41 from 1.19 to 1.10, every 1.30 mm (5 pcs each thickness)

Bracket for assembly / disassembly of common rail pumps, on the workbench.

The circular support must be installed on revolving bases (ref. 8132 or 9260).
The system consists of a circular ring support, on which the (removable) bracket with adjustable projection is mounted, which allows to press the tappets. The circular holder holds an interchangeable round flange, which can rotate 360 degrees and can be locked in any position.
The internal flange allows to fix CP1, CP3, CP4, HP1, HP3, HP4, Delphi and VDO pumps.
Similar to 0 986 612 794

As an additional option, the following optional flanges are also available:
- 8131, for CP3.4 pumps
- 9402, for mechanical pumps A, M, VE, DPC

Torx bit
Similar to 0 986 613 145